Rockler Rail Coping Jig

Produce square cuts and keep the rail flat with the Rockler Rail Coping Jig. The jig clamps the rail securely in place so there’s no chance the stock will wander out of the cut during operation. Use the Rockler Rail Coping Jig for rail and stile doors of cabinets, windows and more to make clean cope cuts without blowouts – perfect for narrow cross-grain rail cuts. If you’re after a cabinet door jig, look no further!

More...

Simply align material flush with the outside edge of the guide block and lock into place with the post handle hold-down clamp and positionable locking knob. Abrasive strip locks the workpiece in place to avoid shimmy or movement. Run the jig along the fence until you cut into the 1" hardwood guide block, which eliminates tear-out.

Guide block is easily replaceable to accommodate different profiles.
Durable phenolic material base measures 7-7/8" wide x 13-1/2" long.
With ergonomic handle for excellent control and comfortable grip.

Allows you to easily make cuts on the ends of rail doors.
NOTE: When using the Coping Sled for the first time, your bit will be cutting a small rabbet in the phenolic base. This is normal and required to minimize tear-out for all future cuts.

Back to overview

Customer Reviews and Photos for:
Rockler Rail Coping Jig

Average Rating:

3.8
(111 customer reviews)

$69.99

Add your review...

1) Submitted by Ross Dickson, from Glendale, AZ on 4/17/2013

Customer Rating:

Gosh but this jig saved me lots of trouble with the wood moving slightly and avoiding the bit dip. It also worked great with smaller styles and rails. I fixed the bit eating the base by raising the bit a bit. Great time and wood saver.

2) Submitted by Robert Danielson, from Edgerton, WI on 11/12/2012

Customer Rating:

I fastened a 3/4 thin strip to ride in my miter slot on my craftsman table it keeps the plate away from the router bit and hense no damage, just raise the bit to match the cope, make sure the strip is 90 % to the edge

3) Submitted by Ken Fitzgerald, from Lewiston, ID on 6/10/2011

Customer Rating:

Went together well. Square out of the box. Clamps worked well.

4) Submitted by Frank, from Silsbee, TX on 6/8/2011

Customer Rating:

Sweet little sled. Simple to use. Even with the phenolic in front of the stop torn up it still works great.

5) Submitted by Bart, from Annapolis, MD on 3/28/2011

Customer Rating:

Had to get this jig, made life so much easier making my rails for storm windows. Can't wait to use it for cabinet doors.

6) Submitted by Gary Root, from Davison, MI on 11/27/2012

Customer Rating:

When I installed the four screws to secure the clamp to the base, the base split wide open on me. I had to make a new base to replace the split one. Even though it was predrilled it split almost immediately when I started the screws.

Editor's note: Our customer service team at 800-376-7856 is available to assist with replacement Gary.

7) Submitted by Jeff Russo, from Lakota, ND on 3/23/2011

Customer Rating:

This product worked verry well for me the first time I used it. There was no problem with setup. It sure is a time saver. I would recomend this to all woodworkers because of it reliabilty and safty fitures.

See all 111 reviews...

Rockler Rail Coping Jig

Customer Reviews and Photos for: Rockler Rail Coping Jig

Customer Reviews and Photos for:
Rockler Rail Coping Jig