Home Power Tools and Shop Accessories Saw Blades and Accessories Table Saw, Chop Saw and Radial Arm Saw Blades Freud LU80R Ultimate Plywood and Melamine Blade


Freud LU80R Ultimate Plywood and Melamine Blade

Freud LU80R Ultimate Plywood and Melamine Blade

Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 4.7  (5 customer reviews)




View Larger Image
Rockler Advantage



  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Freud Industrial Series Teflon-coated saw blade. Produces exceptionally clean cuts in veneered plywood and melamine.

Bookmark and Share  
Technical Details:
  • Designed to produce the cleanest cuts possible in plywood and melamine with no bottom splinter.
  • Application-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.
  • Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.
  • Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.
  • Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.
  • Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.
  • Tri-metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.

What's in the Box?

(1) Freud LU80R Ultimate Plywood and Melamine Blade

Specifications
Freud Model Diameter Teeth H = Arbor Kerf
LU80R010 10'' 80 HiATB 2 degrees 5/8'' .126''
LU80R012 12'' 96 HiATB 2 degrees 1'' .126''

Freud Perma-SHIELD Coating protects from rust & heat build-up. Laser Cut Stabilizer Vents Anti-Vibration design stabilizes the blade to reduce chatter for a flawless finish and longer cutting life.
Silver I.C.E resists corrosion, resin, or ''pitch'' build-up and heat, up to 2x longer than standard polished blades.
Tico Hi-Density Carbide specially formulated to reduce wear & last longer.
Freud creates over 16 different blends of TiCo Hi-Density Carbide designed specifically for each cutting application to maximize blade life and material finish.
TiCo Hi-Density Industrial Carbide Blend Chart
 
Bookmark and Share  

Customer Reviews and Photos for:
Freud LU80R Ultimate Plywood and Melamine Blade

Average Rating:
Customer Review Rating: 4.7
4.7
(5 customer reviews)

Add your review...
1) Submitted by Gary, from Campbell River, BC on 10/13/2011
Customer Rating: Customer Review Rating: 5.0
Amazing, smooth cuts. This is a great blade for cutting plywood without splintering.
2) Submitted by SeaWolf's Home Workshop Blog, from Jacksonville , FL on 6/25/2008
Customer Rating: Customer Review Rating: 4.0
I was frustrated with how fast my steel plywood blades were wearing out cutting plywood, on a Shopsmith 520, so after reading the reviews I decided to give this blade a try. Although a little expensive, I agree with the other reviewers that this is one great blade. It produces clean, low shatter cuts in cabinet plywood. I did experience some burning on the fence side of the blade, but after several cuts it went a way. So far this blade has exceeded the life of two steel blades, but will have to produce quality cuts in excess of six standard blades to be more cost effective over the long haul. If it lasts I would buy it again.
3) Submitted by Mike Vratisovsky, from Minneapolis, MN on 4/27/2008
Customer Rating: Customer Review Rating: 5.0
This blade works well on my Ridgid TS3650. It cuts nice smooth cuts though plywood and other sheet goods. If you want a dedicated blade for cutting sheet goods like a hot knife through butter this is the blade to get.
4) Submitted by Jonathan Bell, from Cincinnati, OH on 3/26/2007
This blade is the "bomb", don't even think about cutting plywood or melamine with anything else. It produces a great cut with NO blowout on the bottom of the sheet (assuming your saw fence is parallel to the blade), prepare to be amazed if you have been using a regular blade to cut your sheet goods.
5) Submitted by David Sanderson, from Littleton, MA on 1/25/2007
I used this blade for ripping up hardwood strips for a breadboard project. It gave a nice clean cut that glued up very well.
 
Order this Item
Quantity Item Number Item Stock Status Price
25419 Freud 10'' x 80T Crosscut Blade
In
Stock 		$94.47 Each
22668 Freud 12'' x 96T HI ATB W/1''Arbor
In
Stock
Online Only 		$137.47 Each



Home Power Tools and Shop Accessories Saw Blades and Accessories Table Saw, Chop Saw and Radial Arm Saw Blades Freud LU80R Ultimate Plywood and Melamine Blade
Locate Your Nearest Rockler Store

"Rockler, I love to shop from your website, I have a graduate degree in business operations and information systems. From this perspective, you do everything right! You are truly a World Class business! Oh! and, as a woodworker, I love your products! Rock on Rockler!"
- Larry Dobbins, MBA, CPA, CPIM - 02/19/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1