Freud LU79R Thin Kerf Ultimate Plywood and Melamine Blade

Thin kerf HiATB double-sided blade provides optimum finish on the top and bottom of laminates, melamine and veneered plywood.

Designed to produce the best possible cuts in plywood and melamine with no bottom chipping.

Specifications

Freud Model

Diameter

Teeth

H =

Arbor

Kerf

LU79R010

10''

80 HiATB

2 degrees

5/8''

.094''

Features

Application-specific super micrograin carbide teeth are 50-60% larger than standard carbide teeth and allow for multiple re-sharpenings.
Anti-vibration technology eliminates sideways movement against the material for a quieter, smoother cut with a superior finish and long cutting life.
Laser-cut heat expansion slots allow the blade to expand during use to keep the cut true and straight.
Permanent red Teflon coating prevents rust and guarantees less working friction and resin adhesion.
Precision-tensioned blade bodies made of high strength steel (40–45 Rc) stay flat and true throughout years of service.
Tri- metal brazing technique produces strong, impact resistant bond between carbide teeth and steel blade body.

Customer Reviews and Photos for:
Freud LU79R Thin Kerf Ultimate Plywood and Melamine Blade

Average Rating:

(5.0)
(4 customer reviews)
Add your review...

1) Submitted by Kevin Beeler, from Corryton, TN on 9/20/2009

Customer Rating:

Ordered this blade to cut an expensive sheet of Walnut veneered plywood. Used it with a zero-clearance insert and the quality of the cut could not have been better. Absolutly flawless! Not so much as the first chip. If you will be cutting plywood of any kind, you NEED this blade!

2) Submitted by Charles Putnam, from Tucson, AZ on 8/28/2009

Customer Rating:

This blade provides an excellent very clean cut in 3/4 melamine and oak plywood products. No chip outs!

3) Submitted by David Caldwell, from Davis, CA on 5/23/2009

Customer Rating:

I paired this blade with a zero clearance insert and it cut 3/4" pre-finished birch veneer plywood like a dream. clean cuts and no splintering. It also worked great when i ripped some engineered oak flooring.

4) Submitted by Fred Shwiller, from Port Angeles, WA on 8/11/2008

Customer Rating:

The blade does an excellent job cutting double sided HPL laminate plywood, plywood and crosscutting hardwoods. I would suggest using a zero clearance table saw insert.

Freud LU79R Thin Kerf Ultimate Plywood and Melamine Blade

Customer Reviews and Photos for:Freud LU79R Thin Kerf Ultimate Plywood and Melamine Blade

ALSO VISIT:

Customer Reviews and Photos for:
Freud LU79R Thin Kerf Ultimate Plywood and Melamine Blade