Infiniter® RS-1 Laser Cutting Guide

Produces a bright, easy-to-see line for dead-on accurate cuts. Triggered by the centrifugal force of the machine, it starts automatically with powered saw action.

Fits most 7-1/4", 8", 10" and 12" miter/chop/cutoff and handheld circular saws.
Easy to install and use!
Powered by three alkaline batteries (included).
5/8" arbor with squared end and internal threading.

More...

Easy installation: simply replace the outer blade washer of your miter saw with the laser guide unit.

Does not fit 12" Ridgid, Pro-Tech, Makita LS1221 and DeWalt DW705S miter saws produced before 2005.
Does not fit Porter-Cable Quick-Change, Skil and worm-drive circular saws.

Infiniter RS-1 Laser Cutting Guide Datasheet

Back to overview

Customer Reviews and Photos for:
Infiniter® RS-1 Laser Cutting Guide

Average Rating:

3.6
(117 customer reviews)

$29.99

Add your review...

1) Submitted by Bruce from CA on 12/29/2012

Customer Rating:

I recently acquired a used Ridgid 12” compound chop saw I think one generation old and thought I would transfer the RS-1 laser from my old 10” chop saw. I knew it was not supposed to work with the Ridgid saw but thought I would try it anyway. The laser fit over the shaft perfectly and the only issue was that the hole in the RS-1 was too small for the Ridgid blade retaining bolt. I was able to drill out the hole in the RS-1 and it now works perfectly. The RS-1 has always worked well and shows the edge of the blade quite accurately.

Areas for improvement:
1. The line is fairly wide and not suitable for super precise trim work, but for most work it is just fine.
2. The laser is visible enough in the garage but becomes hard to see outside in direct sunlight.

2) Submitted by Ron, from Foresthilll, CA on 2/12/2012

Customer Rating:

I recieved my RS-1 laser guide yesterday. I put it on my Dewalt DW705purchased in 1999 without any problem, it fits right on. I did have a problem with laser guide it didn't work at first. My son found the problem was in one of the contact taps located where the batteries fit in. He had to bend the tap out a little so it made contact with the battery. Works perfect, I'm very happy with this product.

3) Submitted by Mike Rosenstock, from Sandia Park, NM on 11/13/2011

Customer Rating:

Just like the literature indicated, it does not fit older Dewalt 705 saws. I solved the problem by adding two washers to space the guard out a bit. Now it fits. The line is "spot on" with my saw. Just have to be within an inch of the material per the instructions.

4) Submitted by Jim, from Jeffersonville, OHIO on 7/28/2011

Customer Rating:

Excellent product. The line falls right on the edge of my zero clearance insert. That tells me it's right on the mark. This is a MUCH better laser line than the Irwin which I bought and was totally unsatisfied with. I would recommend this laser guide to anyone who needs it. Installation took all of 2 minutes.

5) Submitted by Tim, from Bellows Falls, VT on 4/26/2011

Customer Rating:

Bosch 3915 sliding miter saw - took longer to get it out of the package than it did to put it on the saw. Laser line is dead on. Works great!

6) Submitted by Bob, from Erie, PA on 9/16/2010

Customer Rating:

Just arrived and was very easy to assemble. As for the batteriers, I just cut the plastic next to the batteries and they just popped out! All I can say is that it is the BEST product that I ever purchased. Up and running in 5 minutes.

7) Submitted by Fred MacDonald, from Norwell, MA on 1/8/2010

Customer Rating:

Bought it on sale for 1/2 price, installed it on my 20 year old Hitachi 10" chop saw. As with others the toughest part was getting the batteries out of the packaging! Once on it was dead accurate. I can't believe how great this is compared to slowly cutting your way up to my mark. Once again, too bad you can only give it 5 stars as this is has made my miter saw way more user friendly!

See all 117 reviews...

Infiniter® RS-1 Laser Cutting Guide

Customer Reviews and Photos for: Infiniter® RS-1 Laser Cutting Guide

Customer Reviews and Photos for:
Infiniter® RS-1 Laser Cutting Guide