Customize your own jigs. The T-heads fit inside T-slot track or a groove
routed with T-slot bit #26099.
- Available in 5/16"-18 thread or 1/4"-20 thread.
- 5/16'' - 18 bolt bottom plates are 9/16''W x 7/8''L x 7/64''H.
- 1/4'' - 20 bolt bottom plates are 9/16''W x 11/16''L x 7/64''H.
- Zinc-plated steel.
- Sold in packs of five.
Customer Reviews and Photos for:
T-Slot Bolts, Pack of Five
|
Average Rating:
4.9
(10 customer reviews)
Add your review...
|
|
|
1) Submitted by
Sidney Toews , from Montezuma, KS
on 6/17/2011
Customer Rating:
I used these T-bolts to hold a router fence in place, they worked very good.
|
|
2) Submitted by
James Hicks, from Kempton, INDIANA
on 5/28/2011
Customer Rating:
Used to secure a low auxiliary fence to by band saw fence. Lets me set the blade guides lower than standard fence allows. The low auxiliary helps cut down on blade drift when cutting thin stock. The T bolts come in handy when making jigs and hold downs.
|
|
3) Submitted by
Mike Grawvunder, from Waupaca, WI
on 3/23/2011
Customer Rating:
These work great for all kinds of jigs and hold downs. Like the longer size as can always cut them shorter if out of shorter ones. Hard to make short ones longer.
|
|
4) Submitted by
Paul, from Linden, NJ
on 2/26/2011
Customer Rating:
I purchased a number of different sizes T-Bolts, and locking handles. These can be used for many different applications. I went so far as to set up parts bins so I can have a running inventory.
|
|
5) Submitted by
Tony Kalinna, from Mission, TX
on 11/30/2010
Customer Rating:
I built my own router table and I'm using these with knobs for feather boards and jigs.
|
|
6) Submitted by
Jim, from Custer, WA
on 10/8/2009
Customer Rating:
I ordered these T-bolts and through threaded knobs to use on adjustable fences for my miter saw. When I complete the construction of my miter saw stand, I should be able to align the fence extensions with the miter saw fence.
|
|
7) Submitted by
Bob, from Lavonia, GA
on 6/6/2009
Customer Rating:
Rockler always means quality and fast service. This hardware is no different. I recommend Rockler to everyone.
|
|
8) Submitted by
Dave, from Audubon, NJ
on 12/4/2008
Customer Rating:
These work beautifully with the 1/4-20 cam clamps sold on this site. I got these to use as hold downs on my CNC micro mill. I had the hardest time finding t-bolts that fit in those slots! I looked everywhere, tried everything, and nothing was a good fit. These do the trick for me!
|
|
9) Submitted by
John Burnley, from Tyler, TX
on 6/12/2011
Customer Rating: 
The T-slot bolts along with T-slot nuts and a T-slot cutter allow you to make all types of MDF fences.
I did have to modify the nuts to fit my "Ridgid" table saw fence, the nuts
were too wide for the T-slots.
|
|
10) Submitted by
Fred Schwartz, from Rancho Cucamonga, CA
on 11/15/2007
Customer Rating:
I needed to trim down so the fit correctly on my application. They work great
|
Home  Hand Tools and Shop Accessories Jigs, JIG IT's and T-Tracks Jig Parts and T-Tracks T-Slot Bolts, Pack of Five 
|
(0 Items)
