Customer Reviews and Photos for:
16-Pc. Forstner Bit Set
|
Average Rating:
4.4
(40 customer reviews)
$91.39
Add your review...
|
|
|
1) Submitted by
Paul, from Tomlinson, KINGSTON
on 1/5/2013
Customer Rating: 
Though I was a little skeptical about the quality I would probably get at the "GREAT" price, I have NEVER got a dud product from Rockler, so I took the risk! Well, that was ten months ago, this allows me to say, thanks Rockler! To say I have used these bits extensively would be an understatement, everything from 1/4" dowel holes to 2 1/8" counter-bores for ball-bearings { I sometimes make temporary tooling from wood for a small factory }. I have NEVER been disappointed { oh of course I would LOVE a set that incremented by 1/64" - BUT that would be too rich for my blood }. For a production shop these may not be the "best" there is, but for a serious amateur they are pretty darn good, certainly a BEST BUY in my book. Once again, thanks Rockler, and keep those great deals coming.
|
|
2) Submitted by
Buddy Harbin, from Grenada, MS
on 12/15/2010
Customer Rating: 
I used the Forstner bit to bore a flat bottom hole and inserted a small Christmas type light bulb up from the bottom and then put a old time glass telephone knob over the bulb and down into the bore hole and Voila! We have a night lite.
|
|
3) Submitted by
Glenn Bradley from CA
on 4/15/2009
Customer Rating:
At the sale price this set is a good value. I purchased it to use for jobs I would prefer not to use my high end bits for; drilling faucet holes in a resin sink I installed in the shop for example.
The bits perform very well. I usually get rid of the blow molded cases that come with my purchases but this one is actually quite nice and holds all the bits securely.
|
|
4) Submitted by
Bob Freeman, from Orlando , FL
on 3/28/2009
Customer Rating:
I'm very satisfied with these Forstner bits, the quality is excellent. They cut very aggressively and accurately even in the smaller sizes.
|
|
5) Submitted by
Paul Tomlinson, from Kingston
on 1/5/2013
Customer Rating:
Though I was a little skeptical about the quality I would probably get at the "GREAT" price, I have NEVER got a dud product from Rockler, so I took the risk! Well, that was ten months ago, this allows me to say, thanks Rockler! To say I have used these bits extensively would be an understatement, everything from 1/4" dowel holes to 2 1/8" counter-bores for ball-bearings { I sometimes make temporary tooling from wood for a small factory }. I have NEVER been disappointed { oh of course I would LOVE a set that incremented by 1/64" - BUT that would be too rich for my blood }. For a production shop these may not be the "best" there is, but for a serious amateur they are pretty darn good, certainly a BEST BUY in my book. Once again, thanks Rockler, and keep those great deals coming.
|
|
6) Submitted by
John Randall
on 1/22/2009
Customer Rating:
Very nice. Will use them frequently on projects my wife thinks are needed! I'll get to use them any day, now.
|
|
7) Submitted by
Mark Femal, from Slidell, LA
on 1/6/2009
Customer Rating:
Great starter set for the casual woodworker like me. Would recommend this set for anyone needing a basic set with a full range of sizes.
|
|
8) Submitted by
Mike, from North Branford, CT.
on 1/1/2009
Customer Rating:
Good value for the money. Nice to have a complete set.
They cut very smoothly. TIP- use low RPM and cut slowly and clean the cutters out frequently, don't overheat and they will last a long time.
|
|
9) Submitted by
Dannie Williams, from Lyons, GA
on 1/1/2009
Customer Rating:
I have use it already. It worked great and accomplished what I wanted. I had never owned forstner bits before but I am so glad I do now.
|
|
10) Submitted by
Stephen , from Kuhn, TN
on 10/15/2008
Customer Rating:
I have used several of the bits and so far they do everything I want and do it well in hardwood and softwood. I'm glad I bought them.
|
|
11) Submitted by
Earl Wright, from South Bristol, ME
on 10/12/2008
Customer Rating:
I used it on a spinning wheel that I was making and it worked very well.
|
|
12) Submitted by
James, from Georgetown, TX
on 7/22/2008
Customer Rating:
I only bought the 1/2 inch bit - very good quality. I've drilled clean holes quickly in maple, alder, and mahogany. If you plan to use a particular size bit really often I would advise laying out the dough and buying a carbide bit, otherwise these bits are a great value.
|
|
13) Submitted by
Richard Ojeda, from Schinveld, LIMBURG, NETHERLANDS
on 4/22/2008
Customer Rating:
Great price/quality ratio. The sizes that come with this set should be almost all you would need. I just got them and used a few of the bits and they cut clean and fast. I assume that they might need sharpening more often than higher quality bits, but I haven't owned them long enough to say yet.
|
|
14) Submitted by
Norman Walker, from Lodi, CA
on 3/14/2008
Customer Rating:
I am a beginning woodworker. Found the bits to be as good as others I had bought individualy. This is certainly a better way to get a quality product at a great price. They cut cleanly and efficiently and the storage case is a great space saver.
|
|
15) Submitted by
Bob, from St Louis, MO
on 3/14/2008
Customer Rating:
Great value. Easily cut smooth holes in end grain walnut, straight from the box. With a little diamond honing they cut very quickly with a ribbon shaving from the chipper.
May require more frequent sharping than more expensive bits. How much more resharpening is yet to be determined ... still sharp. A full set of bits at a fraction of the cost spent on some single bits is worth a few minutes of honing every now and then.
|
|
16) Submitted by
John Gray, from Effingham, IL
on 3/12/2008
Customer Rating:
Excellent bits I use them all the time. Bought another set to give to a friend for Christmas and he is very happy with them. I actually drilled into a metal brad with one and it still cut great afterwords.
|
|
17) Submitted by
Ed, from Sevierville, TN
on 2/24/2008
Customer Rating:
I have started using Forstner bits more frequently in the last couple of years to construct furniture pieces with nothing but dowels and glue. Needed a decent set of bits and Rockler had these on sale, so I purchased them. I have used several of the bits since purchase and am pleased with them. Excellent price, shipping and service.
|
|
18) Submitted by
Randy, from Munford, AL
on 1/21/2010
Customer Rating:
I used this product to cut holes in a 4" Oak timber to add legs for a bench. The bits are very sharp and cut very quick. The case hinge cracked the first time I used the set.
|
|
19) Submitted by
John, from Effingham, IL
on 2/22/2008
Customer Rating:
Nice set of bits specially when they are on sale and the price is right.
|
|
20) Submitted by
Errol ARford, from De Borgia , MT
on 2/12/2008
Customer Rating:
Wonderful price! Great quality! Haven't had a chance to use them yet but will this summer. Extremely nice set of bits.
|
|
21) Submitted by
Dan, from Grand Forks, ND
on 2/9/2008
Customer Rating:
Delivery service was outstanding. Purchased on sale and given the quantity of bits included in the set I was somewhat skeptical about the quality. Turns out to be excellent value!
|
|
22) Submitted by
Andy, from Maui, HI
on 2/9/2008
Customer Rating:
Great product, no shipping problems.
|
|
23) Submitted by
John Scarano, from Conewango Valley, NY
on 2/9/2008
Customer Rating:
I put one of these exceptional Forstner bits to use almost immediately. I bored out and replaced a broken door-hinge dowel on an antique Chinese cabinet. I very am impressed with the quality of these bits. Thanks for the great reduction in price! I paid a price that is equivalent to the price of two Forstner bits at the hardware store! I can't wait until I get a chance to use them again.
|
|
24) Submitted by
Jason, from Canadian, TX
on 2/8/2008
Customer Rating:
I have yet to be disapointed with any of Rockler products. I received my shipment quickly and am very satisfied with the quality of these Forstner bits.
|
|
25) Submitted by
Jim Hummel, from Port O'Connor, TX
on 2/7/2008
Customer Rating:
Couldn't believe the price I paid for these bits. I had the opportunity to use them on the boat I am building and they work exceptionally well. Very clean hole for the dowel.
|
|
26) Submitted by
Guy, from Farmington, MO
on 2/7/2008
Customer Rating:
My orders to Rockler are always prompt, accurate and well packaged. These forstner bits are (I believe) the best value on the market. They arrive in a tough, tight case and they are not only ready to use, but designed so that they can be honed easily so they will last many years. Let's hear it for Rockler!
|
|
27) Submitted by
Tony Hollins, from Prescott, AZ
on 1/25/2009
Customer Rating:
I've used Forstner bits in the past and they are great. Today, I used my one of the bits to help two of my neighbors' children with their 'pine wood derby' cars by drilling out the locations for the weights they will use for their cars. They liked the way the drills left a flat bottom hole in which to add the weights. There is nothing more satisfying than helping a child with a project.
|
|
28) Submitted by
Jeff Nicol, from Eau Claire, WI
on 2/7/2008
Customer Rating:
I got a great deal on a super set of forstner bits! They work great and the size range fits most everything!
|
|
29) Submitted by
J B Lee, from Fishers, IN
on 2/4/2008
Customer Rating:
These bits work great, fine sharp cutting edges produce a sharp cut with no gouges and a perfect outside edge. Very happy with the result.
|
|
30) Submitted by
Bob Friehe, from Hebron, NE
on 10/24/2007
Customer Rating:
The bits work great amd the shipment was very fast. Great product.
|
|
31) Submitted by
Frank Jarone Bryant, from Franklin, TN
on 10/3/2007
Customer Rating:
Remodeling a house to flip and have to jack up the center beam and floor joist to be replaced. Had to drill holes to accept lag bolts and worked great. I give these bits 6 stars.
|
|
32) Submitted by
Chris Gunter, from Anderson, SC
on 1/23/2009
Customer Rating:
Looks GREAT!
|
|
33) Submitted by
Ron, from Boise, ID
on 9/30/2007
Customer Rating:
Just what I expected. Got here fast. Thanks
|
|
34) Submitted by
Edward Cunningham, from Mexia, TX
on 9/24/2007
Customer Rating:
Really higher quality than expected for an "On Sale" item.
|
|
35) Submitted by
Martin Mierz, from Middletown, CT
on 3/25/2009
Customer Rating: 
I guess for the price its not bad but the quality is just not there, all of the bits seemed to be nicked and damaged you have to hone them first before you can use them I'll never buy these again!
|
|
36) Submitted by
Len Powell, from Thomasville, GA
on 3/19/2009
Customer Rating:
I have already used these bits several time, and they do a good job. One thing I would encourage anyone to do is NOT buy "cheap" bits. I've got several inexpensive sets I've bought through the years and they just don't do the job....this are well worth the money.
|
|
37) Submitted by
Oscar Ginocchio, from Hollywood, FL
on 12/4/2006
Excellent and precise holes.
|
|
38) Submitted by
Josh Bray, from Oroville, WA
on 10/9/2007
Customer Rating:
Bounces around a little bit on harder woods. But the product works great for making precise small holes without leaving a hole in the back of something thin. Great DEAL!!!
|
|
39) Submitted by
R. da Silva, from San Francisco, CA
on 12/25/2008
Customer Rating:
Good value in HSS Forstners.
|
|
40) Submitted by
Brad Lindhorst
on 2/18/2008
Customer Rating: 
Very dull for a new bit.
|
Hand Tools and Shop Accessories 
(0 Items)
