Home Finishing, Sanding, and Glues Sprayers and Spray Finishing Accessories Gravity Feed HVLP Touch-Up Spray Gun


Gravity Feed HVLP Touch-Up Spray Gun

Gravity Feed HVLP Touch-Up Spray Gun

$49.99Each   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 3.7  (4 customer reviews)




See More Images
Rockler Advantage


<b>Hands-free spray gun holder-#30094</b> easily attaches to bench or wall with pre-drilled mounting holes. Funnel/strainer holding ring makes filling paint cup easy. <b>Inline gravity feed mesh filters-#39043</b> remove dirt particles from paint to protect against defects. Inserts into spray gun fluid inlet prior to cup installation.

  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Finishing projects are easy with this affordable solution for small touch-up work.
  • With 1.0mm stainless steel needle/nozzle set for lighter materials.

Bookmark and Share  
  • Die-cast aluminum body with chrome-plated finish.
  • 2-step trigger control.
  • 100cc stainless steel paint cup.
  • Spray pattern control knob on side of gun.
  • Adjustable spray width, air inlet and fluid outlet.
  • 15-45 PSI operating pressure.
  • 3.5-6 CFM air consumption.
  • 1/4" air inlet.
  • Non-bleeder type, gravity feed external mix.

Accessories (sold separately):
  • Hands-free spray gun holder easily attaches to bench or wall with pre-drilled mounting holes. Funnel/strainer holding ring makes filling paint cup easy.
  • Disposable inline spray gun air filters help reduce painting defects. Removes moisture, oil vapor and rust particles that pass through conventional filters. High flow design minimizes pressure drop to spray gun. 100 PSI maximum pressure. Attaches directly to the air inlet of the spray gun.
  • Inline gravity feed mesh filters remove dirt particles from paint to protect against defects. Inserts into spray gun fluid inlet prior to cup installation.
 

Technical Documents
Bookmark and Share  

Customer Reviews and Photos for:
Gravity Feed HVLP Touch-Up Spray Gun

Average Rating:
Customer Review Rating: 3.7
3.7
(4 customer reviews)
$49.99

Add your review...
1) Submitted by Hugh Madden, from Grand Rapids, MI on 3/19/2009
Customer Rating: Customer Review Rating: 3.0
I have used the touch up sprayer on two occasions with differing materials, and both seemed to work well. The first one was spraying a thinned polyurethane varnish and the second was spraying a water based stain. The adjustment screw to increase or decrease the material applied seems to be a bit sloppy in delivering the desired results but it was good enough for my application. When you consider the price with the results, it was a good purchase.
2) Submitted by Jim Helms, from Greensboro, NC on 8/3/2008
Customer Rating: Customer Review Rating: 4.0
In the past I had used touch-up spray guns from [home center], but when they stopped selling the type I was using a couple of years ago, I tried several other sources without finding one I really liked. One of my fellow Fabrion franchisee recommended the spray gun sold by Rockler. I ordered a couple of them and found them to be exactly what I had been looking for. I am getting ready to order a couple more. I use the spray guns to spray water based dyes and sealers in the process of repairing automobile interiors - dyeing leather, vinyl, plastics, carpets, etc.
3) Submitted by Gary Storme, from Anacortes, WA on 11/28/2006
I used it to finish a quilt stand with urethane thinned down approx 10%. It was great for a small project. I didn't want to use my larger HVLP and this worked out just fine. One filling and then cleaned the gun, come back later and repeated until desired finished had been achieved. I have no complaints. Worked perfect for me.
4) Submitted by James Larsen, from Paso Robles, CA on 10/15/2008
Customer Rating: Customer Review Rating: 4.0
This product is an excellent buy for the money. I used it to spray Deft brush-on lacquer thinned 33% (2:1) @ 16lbs of pressure. Worked beautifully. The only criticism I will offer is there are no instructions and the description states "15-45 PSI operating pressure" and printed right on the gun "not over 21 PSI". Which is it? The "manual" is non-existent for all practical purposes.
 
Order this Item
Spray Gun:
Quantity Item Number Item Stock Status Price
31860 HVLP Touch-Up Spray Gun, 1.0mm
In
Stock
$49.99 Each
Accessories:
Quantity Item Number Item Stock Status Price
30094 Spray Gun Holder
In
Stock
$11.19 Each
39043 Inline Spray Gun Air Filters, 2-Pack
In
Stock
$12.59 Each
35214 Inline Gravity Feed Mesh Filters, 5-Pack
In
Stock
$7.39 Each
20550 3M #21 Adapter for EZ-Clean Spray System
In
Stock
$22.59 Each



Home Finishing, Sanding, and Glues Sprayers and Spray Finishing Accessories Gravity Feed HVLP Touch-Up Spray Gun
Locate Your Nearest Rockler Store

"I love shopping with Rockler the list of items I have purchased is many...... have yet to make it to the local store.............. when I do I will need lots of cash Thank you Rockler"
- AQC Handyman - 07/09/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web2