Home Routers and Accessories Router Bits Flush Trim Bits Shear Cutting Flush Trim Bits


Shear Cutting Flush Trim Bits

Shear Cutting Flush Trim Bits

$34.99Each   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 4.8  (13 customer reviews)




See More Images
Rockler Advantage


#24740 Single Top-Mounted Bearing #27867 Double Bearing

  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Instead of chopping at the wood fibers at a 90° angle, the shear angle cutters on these bits slice through stock at a slight angle, producing a smoother cut than traditional straight-fluted bits. The unique design also helps eliminate tear-out problems that occur when routing end-grain or cross-grain on hardwoods.

Bookmark and Share  
 
Item No. A B C
24740 3/4" 1-1/2" 1/2"
27867 3/4" 1-1/2" 1/2"
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.

Quality performance features include:

  • K10 and K20 grade carbide for clean cutting action.
  • Final sharpening with 600 - 800 grit diamond wheels.
  • Precision balanced for smooth operation.
  • Baked-on anti-stick coating to reduce pitch and resin buildup.

100% GuaranteeIf you are not 100% satisfied with these bits, send them back for a refund.
Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.

1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.
 
Bookmark and Share  

Customer Reviews and Photos for:
Shear Cutting Flush Trim Bits

Average Rating:
Customer Review Rating: 4.8
4.8
(13 customer reviews)
$34.99

Add your review...
1) Submitted by Tom , from Kucharik, IL on 6/12/2010
Customer Rating: Customer Review Rating: 5.0
I bought ths bit to use with templates that I can attach to the project and have the templete on top as I rout the shape on an under table mounted router. Works very well for that application.
2) Submitted by G Francesco, from Pensacola , FL on 5/22/2010
Customer Rating: Customer Review Rating: 5.0
I've used and burned out many standard (non-shear) flush trim bits. I saw the shear trim bit on sale and decided to give it a try. All I can say is WOW. I blew through 3/4" oak without bogging down, burn marks, or tearout. Just perfect smooth edges. You won't find a better bit for this price.
3) Submitted by Max Callaham, from Harrison, AR on 4/3/2010
Customer Rating: Customer Review Rating: 5.0
I used the flush trim router bit for the first time while building six cabinets. This bit made my work look like I knew what I was doing in building cabinets, but this was the first cabinets I ever built. It trims up the tops and sides of the cabinet to make it look like I cut all the pieces correctly, which I didn't. I would highly recommend this bit for trim work on anything, not just cabinets. It is well worth the money. Get it, you'll love what it can do.
4) Submitted by Adam Falk, from Stillwater, OK on 11/8/2009
Customer Rating: Customer Review Rating: 5.0
The best flush cut bit I've ever used. Very smooth clean cuts even on tiger maple and woods with wild grain patterns. The shear cut really makes all the difference and the double bearing is so handy. It's a hefty bit too and works great in the router table.
5) Submitted by Chuck Hevenor, from Mystic, CT on 7/5/2009
Customer Rating: Customer Review Rating: 5.0
Outstanding results for template work. The shear configuration gives very fine surface finish. The double bearing allows for all downhill cutting by flipping the part, and raising or lowering the bit.
6) Submitted by TK, from Greenbelt, MD on 4/27/2009
Customer Rating: Customer Review Rating: 5.0
Smooth. Easy. Bearing also smooth and seems well made. Even got gummed up with some adhesive (from a veneer) and performed well.
7) Submitted by Dustin, from Lino Lakes, MN on 7/21/2009
Customer Rating: Customer Review Rating: 5.0
I purchased the 2-flute, double bearing model and have been very pleased. The cuts are smooth and require very little sanding. The double bearing setup makes the bit very versatile for pattern work. The working length is generous (1-1/2"), so it's possible to stack work pieces and cut two parts at once with light passes. The carbide seems to be holding up quite well despite some ham-fisting on my part in hard maple.
See all 13 reviews...
 
Order this Item
2 Flute Shear Flush Trim Bit:
Quantity Item Number Item Stock Status Price
24740 2 Flute Shear Flush Trim Bit, 3/4'' Dia. x 1-1/2'' Cutter x 1/2'' Shank
In
Stock 		$34.99 Each
2 Flute Double Bearing Shear Flush Trim Bit:
Quantity Item Number Item Stock Status Price
27867 2 Flute Double Bearing Shear Flush Trim Bit 3/4'' Dia x 1-1/2'' Cutter x 1/2'' Shank
In
Stock 		$42.99 Each



Home Routers and Accessories Router Bits Flush Trim Bits Shear Cutting Flush Trim Bits
Locate Your Nearest Rockler Store

"What can I say? Easy...Rockler's one of the good guys:}< inclusive noun... the ladies I've talked too are as knowledgeable about their products as the guys! Keep up the great work."
- Les Delcambre - 09/30/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web2