Related Products
|
|
|
 |
- Overview
- More Info
- Reviews
| Holds wood snug against fence for a safer and cleaner cut when ripping, routing, drilling and more. Allows featherboard to apply pressure at the table level and at the top of the router table fence 3" above the table. Ideal when routing workpiece on edge or when using vertical panel raising bits.
|
 |
- Features two easy-to-grip locking knobs that safely position featherboard in place.
- Unique, expandable miter track bars provide maximum holding power.
- For use with table saws, router tables, drill presses — any tool with a standard miter slot.
|
| |
Customer Reviews and Photos for:
Rockler Double Featherboard Kit
|
Average Rating:
(4.7)
(7 customer reviews)
Add your review...
|
|
|
1) Submitted by
Richard Branch, from Covina, CA
on 11/9/2009
Customer Rating: 
I bought two about six months ago, and haven't stopped using them. I use them with my table saw, router, band saw. They are especially useful with my table saw.
Thanks, Rockler. Great Product.
|
|
2) Submitted by
John Guy, from Milwuakee, WI
on 10/21/2009
Customer Rating:
Worked great. I bought them to help me rout locked mitre joints. You need to keep the board absolutely vertical all the time - otherwise the tongue is compromised. I bought 2 one of infeed and one for outfeed.
|
|
3) Submitted by
Jerry Parrish, from Parkville, MO
on 7/9/2009
Customer Rating:
AWESOME featherboards for ripping. keeps the wood up against the fence without any fluctuation. best tool i have purchased for a while. I highly recommend it especially if you do much side cutting. Works great on the router and table and band saw
|
|
4) Submitted by
Alvaro, from Redlands, CA
on 7/7/2009
Customer Rating: 
Very good helper.
|
|
5) Submitted by
Mark Weibrecht, from Madison, SD
on 6/17/2009
Customer Rating:
Very good product for the price. I have Bench Dog's as well and these are cheaper and do just as good a job. If you don't own feather boards get them! Buy 2 of these (21752) and 2 of item number 26993 (miter track adapters). You will be set up with 2 large and 4 small feather boards when you need them. It's ideal. Wonderful product.
|
|
6) Submitted by
Charles S. Green, from Fruita, CO
on 11/24/2007
Customer Rating:
I purchased the Double Featherboard to use on my Craftsman 10" table saw. I needed to resaw some 1x6 pine down to 1/4". The featherboard held the material against the rip fence in a much safer manner than I could with my bare hands. The only problem I had was the rails for the miter slot on the saw table were not the right size for the Featherboard rails. I made some rails in the same form as the aluminum rails out of some scrap hard wood I had on hand. They work just fine.
|
|
7) Submitted by
Joe Elliott , from Sunrise Beach, MO
on 3/13/2008
Customer Rating:
I bought the double featherboard to use with my bandsaw. I needed to resaw some slab mahogany for a project and I needed a way to hold the wood tight against the fence while I fed the wood into the blade. I had to assemble the featherboard upside down since the feed direction on the bandsaw is opposite other tools, but the unit worked perfectly.
|
Home  Hand Tools and Shop Accessories Workshop Accessories Shop Safety Tool and Workshop Safety Rockler Double Featherboard Kit
|
|
CART
