All have 1/2" shanks to reduce chatter and provide maximum
Comes in convenient storage box.
Rockler Router Bits are the finest available for use in creating
jewelry boxes, humidors, and other small boxes and crafts!
Top quality bits that meet the high demands of Rockler Woodworking and Hardware.
A fantastic value on high quality router bits. These bits are competitively
priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
you are not 100% satisfied with these bits, send them back for a refund.
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
Kimo T, from Kailua, HI
Nice set. Appreciate the storage box a lot. Use it for custom trim finishing. 1/2" shaft is key to smooth work. Wish I'd bought it years ago!
2) Submitted by
Bob L., from Lavonia, GA
Love this set. Nice case and the 1/2" shafts make all the difference. Professional quality. Thanks Rockler!
3) Submitted by
Michael Seaman, from Kenai, AK
Great set and a good price. 1/2 inch shaft makes a world of difference.
4) Submitted by
Vern, from Buffalo, NY
When I bought my Router last year, it came with 1/4" and 1/2" collets. I had been using my existing 1/4" router bits. I bought this set because my roundover bit was getting dull. What a difference the 1/2" shaft makes. Much smoother cuts, less chatter. I'm sold, it's 1/2" shafts from now on and all from Rockler.
"I have been ordering from Rockler for almost 20 years and have found their products to be very inexpensive and of high quality. Shipping is fast even when an item is back ordered. The best prices I have found anywhere." -
- 08/07/2012 See more...