Customer Reviews and Photos for:
7'' Quick Release Workbench Vise
|
Average Rating:
2.9
(13 customer reviews)
$124.99
Add your review...
|
|
|
1) Submitted by
Ronald Sanchez, from Genoa, IL
on 5/11/2010
Customer Rating: 
Extremely happy with this vise, good quality, and good price. I will recomend this product to others, another great product from Rockler. Thumbs up :)
|
|
2) Submitted by
Rick Estep, from Bella Vista, AR
on 1/11/2008
Customer Rating:
I researched quite a bit before puchasing this vise, and I am very pleased. I beleive this is the best value out there. Buying from Rockler, as always adds a lot of peace to the purchase decision. Thanks Rockler for a great product at a good price!
|
|
3) Submitted by
Warren Vann, from Huntsville, AL
on 12/16/2007
Customer Rating:
Easy to mount and smooth operation. Plates have a small amount of play so you have to be careful to align them before tightening the vise if you are using it flush. Overall it is what I expected and I am enjoying it.
|
|
4) Submitted by
Jim Varcados, from Green Cove Springs, FL
on 10/26/2007
Customer Rating:
Wooden face plates take 5/16 contersunk screws (hard to find) I think they should have been at least 1/4 in. The plates don't line up quite right, but I can live with that. It's better than using a machine vise. Bottom line "I like it"
|
|
5) Submitted by
Brian, from Canton, MI
on 7/23/2007
Bolts for mounting wooden vise pads are not included. Also, the thread size for those bolts is not indicated anywhere so you don't know what type of bolt to buy.
|
|
6) Submitted by
Greg, from Salinas, CA
on 6/2/2009
Customer Rating: 
After a few months of light use my vise would only hold gently. When tightening it up it would slip teeth due to a malfunction of the quick release. The vise has "Taiwan" stamped on the bottom. I expected this vise to last a lifetime so I'm pretty disappointed.
|
|
7) Submitted by
Trevor McIntyre, from Wildwood, MO
on 10/1/2009
Customer Rating:
I found the mounting directions (drill 1/4 in holes for 1/4 inch bolts) lacking. Also, the lack of mounting bolts for wooden faces was disappointing, as was the lack of information about the size and thread required. Otherwise, I look forward to many hours of use.
|
|
8) Submitted by
Joe Garcia, from Caguas, PR
on 5/10/2010
Customer Rating: 
Muy satisfecho con la prensa de banco y muy facil de instalar.
I'm very satisfied with your workbench vise and it is easy to instal. Thanks
|
|
9) Submitted by
Nicolas Brown, from Reno, NV
on 11/29/2010
Customer Rating:
My quick release is starting to fail so that I can't tighten the vise much, and I truly have not used it for to long. Very disappointing.
|
|
10) Submitted by
Jim Gongaware, from Batavia, IL
on 2/7/2011
Customer Rating: 
I have had this vise for about 2 1/2 years, and used it regularly. For about the the first 2 years it worked fine. But then the quick release nut began to slip occasionally. Now it will barely tighten at all. Unless I can get a replacement quick release nut, I won't have much use for it, other than possibly as a boat anchor.
|
|
11) Submitted by
Tim Griswold, from Rocklin, CA
on 5/10/2011
Customer Rating:
This vise compared to some of the others in the same price range shines, however it is a little crude in some area's, the quick release for one and the face plates don't line up correctly. But it is fine for my needs.
|
|
12) Submitted by
Jonathan, from Winchester, MA
on 2/12/2013
Customer Rating:
After a short time, quick release keeps popping open. Tech support suggested oiling mechanism, seem to work for a while, but now nothing helps. A waste. Now I have to get another type. Very disappointed
|
|
13) Submitted by
Tom Dunlea, from Cincinnati, OH
on 4/6/2008
Customer Rating:
I like Rockler, but this vise had no mounting instructions or hardware recommendations. Just installed so I will see how it holds up.
|
Shop Essentials 
(0 Items)
