Related Products
|
|
|
|
|
 |
- Overview
- More Info
- Reviews
- Videos
| Now you can easily create perfect circles, ellipses and sweeping arcs! With your router and this handy, easy-to-use jig, you’ll be able to make picture frames, mirrors, signs, tabletops and more in just a matter of minutes. Compare to other ellipse/circle router jigs that cost $100 more. |
Designed for use with just about any plunge router, the Rockler Ellipse/Circle Router Jig lets you cut circles and ellipse shapes over a wide range of dimensions and proportions. Set up takes only a couple of minutes and is virtually math-free. Using the jig is just as easy. As you move the router through the cut, the jig's sliding dovetail mechanism keeps the router precisely on the cut line.
- Maximum length for major axis is 52".
- Maximum difference between minor and major axes is 8".
- Includes jig arm, jig base, two dovetail keys, and two locking pivots.
- Single pivot can be locked to make circles up to 52" diameter.
- Pre-drilled for Porter-Cable 690/890 routers or routers with 6" base footprints.
- Made from 1/4" thick phenolic for durability.
|
| |
Customer Reviews and Photos for:
Rockler Ellipse/Circle Router Jig
|
Average Rating:
(3.4)
(27 customer reviews)
Add your review...
|
|
|
1) Submitted by
Tim Myers, from Murphy, TX
on 10/12/2009
Customer Rating: 
I have only made circles with this so far but have been very impressed with how solid this piece of equipment is. I even made several rings as little as 1/8" thick 15" inches in diameter from MDF and it was accurate enough to cut the ring perfectly. So far a fool proof product.
|
|
2) Submitted by
Mike Shields, from Bloomington, IN.
on 9/27/2009
Customer Rating:
Excellent addition to my workshop! Worked great right out of the box. I am a devoted Rockler customer. Thanks!
|
|
3) Submitted by
Mark D. Spivey, from Tomball, TX
on 6/30/2009
Customer Rating:
Excellent jig. As a novice the thought of cutting an oval is intimidating at best. The Rockler Ellipse/Circle Router Jig made cutting a breeze! I cut 2 identical oval tops for a couple of end tables I refurbished and had zero problems. Easy to adapt to a Skill brand router. Would recommend to anyone!
|
|
4) Submitted by
Jamie, from Houston, TX
on 12/19/2008
Customer Rating: 
Good product, but came with a crack in it. I needed to use it so didn't bother trying to exchange it, just went ahead with it. Not sure why it cracked, Rockler should package better. Still ... good product.
Editor's note: A call to our customer service at 800-279-4441 and will be able to replace that for you Jamie.
|
|
5) Submitted by
Dan, from Park City, UT
on 12/14/2008
Customer Rating:
As was said before, keep things tight and this jig works like a charm.
|
|
6) Submitted by
C. Arnold, from Pasadena, MD
on 11/17/2008
Customer Rating:
This jig was bought to do eyebrow arching in my den/library for each partition of my built-in project. At first I made a custom homemade wood jig to retrofit the jig to my old craftsman router from the 19th century and it worked but was cumbersome. I needed a new router anyway and purchased a porter/cable that was designed for this jig and it fit like a glove. With the right bits and router this jig is great! It has very smooth glide action across work piece from its phonolic construction. Very easy to use with instructions listed on the jig itself.
|
|
7) Submitted by
Todd, from Woodland, CA
on 10/17/2008
Customer Rating:
The thing works great. You just have to make sure everything is tight. I had one failure where the pin came out of the pivot point and it made a big mess out of my wood, an oak barrel head, and snapped the bit. $$ Other than that it's doing real well.
|
See all
27 reviews...
|
Home  Power Tools and Shop Accessories Routers and Accessories Router Accessories Rockler Ellipse/Circle Router Jig
|
|
CART
