Related Products
|
|
|
|
|
 |
- Overview
- More Info
- Reviews
- Videos
| Introducing the first Euro-style concealed hinge for your 3/8" lipped (overlay) doors! Rockler exclusive plate mounts to back of frame to combine with high-quality, nickel-plated Salice hinge.
|
 |
Now you can retrofit 3/8" lipped doors, which are the most common style in kitchens.
- Conceals knuckle and gives complete control for three-way cam adjustability.
- Ideal for retrofitting cabinetry dating back to the 1940s.
- 110° opening.
- Snap-close.
- With side, depth and height adjustment.
- For Face Frame Cabinets
- 35mm Diameter cup and 9mm deep metal cup.
- Includes mounting hardware and instructions.
|
| |
Customer Reviews and Photos for:
Salice Hinge and Plate for 3/8'' Lipped Doors
|
Average Rating:
(4.8)
(8 customer reviews)
Add your review...
|
|
|
1) Submitted by
Todd Starr, from Buford, GA
on 11/29/2009
Customer Rating:
I recently retrofitted 38 doors in a kitchen. These were the only concealed hinge I could find to do the job. I took the doors to a cabinet shop, and for much less than I would have spent at the house had the doors properly bored. This made the installation straight forward as every door had the exact distance from top and bottom to center of hinge. I simply made a gauge block to use for mounting the bottom hinge plate to the faceframe, snapped the door in place and screwed off the upper hinge plate.
The hinges work well and have plenty of adjustment. I will use them again.
|
|
2) Submitted by
Aaron Keathley from CT
on 4/4/2009
Customer Rating:
These hinges are the perfect solution to retrofitting older cabinet doors. I recently installed 15 pair in a kitchen and the result was great. A couple of things to consider:
- The mounting plates work well but the installation is rather tedious. I found if you use a self tapping hexhead screw to mount the bracket to the face frame it makes it a million times easier because you don't need to pre drill or fight to keep the phillips head engaged on the provided screws.
- I found that the mounting brackets are made specifically for 3/4" face frames. I had to drill new mounting holes in the bracket to move the base closer to the face of the cabinet because the face frames were 5/4" material.
- finally, just make sure you have a right angle drill or compact drill for these
Overall these are awesome!
|
|
3) Submitted by
Jack Baenziger, from Detroit Area, MICHIGAN
on 3/29/2009
Customer Rating: 
Very good product -- found that the bracket that hooks to the cabinet was very hard to install. Getting tools and hands in the small space was very frustrating.
|
|
4) Submitted by
Mike Barrett, from Norfolk, VA
on 2/2/2008
Customer Rating:
This is a decent hinge and the only 'Euro' type hinge I could locate for a lipped door. Installation was straightforward and I am certainly pleased.
|
|
5) Submitted by
Bryan Buchtel, from Norfolk, VA
on 1/21/2008
Customer Rating:
The hinges are great. A little hard to put on but they work fantastic.
|
|
6) Submitted by
Roger Jenkins, from Arlington, MA
on 10/23/2007
Customer Rating:
I was looking for a hidden hinge for 3/8" recessed doors. The hinges were installed before the cabinet fronts were attached to the wall. I did several tests before drilling the holes in the cabinet doors. They installed rather easily. Plus they have 4 degrees of adjustment to align the doors. The fact that depressing a release tab on the hinge the doors can be easily removed and replaced. The only problem I had was measuring 47/64".
|
|
7) Submitted by
Donald Ambrose, from Dallas, TX
on 9/3/2007
Customer Rating:
The 3/8" overlay door hinge is fantastic. It's solid, strong, holds the door closed, is fairly easy to install and is completely invisible. I replaced the hinges on eight cabinet doors in about 3 hours.
I used the Rockler jig to speed things up and was very satisfied with the results. My real concern was mounting the hinge bracket to the cabinet's face frame. This was difficult, you're working in a closed in area that's not visible. You need a 90 degree drill, a centering bit and a small clamp to hold the mounting plate to the face frame. Using the Rockler jig to mount the hinge to the door makes your task simple. Every hinge is then in the same place allowing you to easily determine the hardware location on the cabinet face frame.
The hinges are expensive but worth every penny.
|
See all
8 reviews...
|
Home  Hardware Hinges Cabinet Hinges by Application Face Frame 3/8'' Inset Hinges Salice Hinge and Plate for 3/8'' Lipped Doors
|
|
CART
