Olson All Pro Band Saw Blades - Custom Sizes

• All Pro blades have higher tensile strength than any other brand.
• Blades contain pin-point carbides, molybdenum, nickel, chrome and silicon to ensure maximum durability and easy cutting.
• Cuts a wide range of woods, plastic and non-ferrous metal.
• Raker set clears the dust quickly, allowing rapid cutting.
• Back Hardness of Rc 40-50.
• Tooth Hardness: Rc 64-66.

1/8" Wide Band Saw Blade

• 1/8" width can cut a 1/4" radius circle!
• Slightly wider than the 3/32" blade for more stability.
• 10 TPI offers a faster cut and a minimum material thickness of 5/16".
• 14 TPI offers a smoother finish and the ability to cut a minimum material thickness of 1/4".

3/16" Wide Band Saw Blade

• 3/16" width can cut a 3/8" radius circle!
• 10 TPI offers a clean finish.
• Minimum material thickness of 5/16".
• Maximum material thickness of 3".
• Regular tooth - excellent chip carrying capacity in narrow bands.

1/4" Wide Band Saw Blade

• 1/4" width can cut a 3/4" radius circle.
• Medium width offers stability for a wide range of cutting applications.
• 6 TPI balances fast cutting with less saw marks.
• Minimum material thickness of 1/2".
• Maximum material thickness of 5".
• Regular tooth - excellent chip carrying capacity in narrow bands.

3/8" Wide Band Saw Blade

• Medium width offers stability for a wide range of cutting applications
• 4 TPI balances fast cutting with less saw marks.
• Skip tooth - excellent chip carrying capacity and aggressive cut.

1/2" Wide Band Saw Blade

• Medium width offers stability for a wide range of cutting applications.
• 3 TPI balances aggressive cut and fast feed rates.
• Hook tooth - excellent chip carrying capacity and aggressive cut.
• Great for resawing.

5/8" Wide Band Saw Blade

• 5/8" width can cut a 4" radius circle.
• Wide blade offers maximum stability and beam strength for extremely straight cuts and resawing without “barreling”.
• Thin kerf makes the work easier for your saw and produces less waste.
• 3 TPI can rip through the thickest lumber!
• Minimum material thickness of 1".
• Maximum material thickness of 6".
• Hook tooth - excellent chip evacuation in thick wood with a more aggressive feed.

3/4" Wide Band Saw Blade

• 3/4" wide blade offers maximum stability and beam strength for extremely straight cuts and resawing without “barreling”.
• Thin kerf makes the work easier for your saw and produces less waste.
• 3 TPI can rip through the thickest lumber!
• Hook tooth - excellent chip evacuation in thick wood with a more aggressive feed.

1" Wide Band Saw Blade

• 1" width is typically the widest blade for consumer saws, offering maximum stability and beam strength for extremely straight cuts and resawing without “barreling”.
• Thin kerf makes the grueling work easier for your saw and produces less waste.
• 2 TPI will tear through the thickest lumber!
• Hook tooth - excellent chip evacuation in thick wood with a more aggressive feed.

Please read the following information carefully before ordering:

• Most 10'' and 12'' band saws will accept blade widths ranging from 3/32'' to 1/2''. Check your owners manual to be sure about the length and width range.
• Most 14'' band saws with standard guides (steel, plastic or Cool Blocks) will take widths ranging from 3/32'' to 3/4''. However, some 14'' band saws with bearing guides may not accept extremely narrow widths. Check your owners manual to be sure about the correct length and width range.
• 16'', 18'' and 20'' band saws with bearing guides normally take band saw blade widths ranging from 3/16'' to 1'' and wider. Check your owners manual to be sure about the corren lenght and width range.
• Rockler suggest that you replace OEM guides with Cool Blocks for proper performance and extended blade life. Cool Blocks are a must for narrow widths to facilitate accurate scrolling and to prevent tooth damage.
• These blades are intended for vertical 2-wheel band saws ranging from 10'' to 20'' throat (wheel) size.
• Minimum length is 72''