fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
performance features include:
and K20 grade carbide for clean cutting action.
sharpening with 600 - 800 grit diamond wheels.
balanced for smooth operation.
anti-stick coating to reduce pitch and resin buildup.
you are not 100% satisfied with these bits, send them back for
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
"Rockler is my only source for fine tools and woodworking supplies. Every item I have purchased from them has been better than I anyone would expect from other suppliers. Thanks to them I have begun the wonderful and rewarding journey into turning, from my lathe to all my turning tools and gadgets, I am a fan. Rockler has enhanced my knowledge and expanded my enthusiasm. They are customer oriented. " -
- 03/08/2013 See more...