Behlen Top Coat Lacquer and Sanding Sealer

• Fully compatible with Behlen solvent base stains and other Behlen aerosol lacquers.
• Allow 1 hour dry time between coats.
• Allow final coat to dry overnight.

Sanding Sealer:

• Sand wood to 320 grit before application.
• Allow 30 minutes to dry before sanding to 360 grit smoothness.
• Never apply more than 2 coats of sealer.
• Allow 1 to 2 hours dry time for the final coat.

Can only be shipped by UPS Ground to addresses within the continental United States.

Do not waste your money. The spray nozzle is poor, and the finish it left on all surfaces was full of blush. I tried it three times, with two separate cans, with terrible results each time.

I ordered one can of sanding sealer and four cans of the satin gloss for my project.  This is an excellent lacquer. I am very pleased with the way it lays down, and the resulting finish. Even without subsequent high-grit sand-outs, the finish is great. However, there is one thing that keeps me from giving this a higher rating. When a can is first used, the results are great. However, for three of the cans, even after clearing the nozzle as recommended, subsequent uses resulting in "spitting" - blobs of lacquer along with the fine spray. Once this is on the surface, there is nothing to do about it except let it dry and then sand it out. It's a really horrible feeling when you see this happening. I addressed the problem by removing the spray nozzles and soaking them in lacquer thinner between uses. I had no more spitting problems when reusing a can with this approach. Still, I recommend you test spray a piece of cardboard or newsprint before you turn the spray on your project. If you get blobs, you'll save yourself some sanding.