- Overview
- More Info
- Reviews
This finish soaks deep into wood pores to provide protection from the inside out. Because it hardens inside the wood, it will never chip, peel or wear away. Made from a unique blend of penetrating oil and varnish that stains, seals and protects in one easy step, it enhances the natural look and feel of the wood, and creates the rich, warm glow of a hand-rubbed finish. Great for furniture, trim, molding or any other bare wood interior surface. Simply wipe on with a brush or cloth. Quart.
- Use only on dry wood from which all previous coatings have been removed.
- Flood surface using a brush or cloth, applying additional finish to areas that absorb all of the liquid.
- Allow to penetrate for 30 minutes.
- Reapply, allowing an additional 15 minutes of penetration.
- Wipe surface completely dry.
- Ready for use in 8-10 hours.
- If a topcoat such as polyurethane is desired, allow oil to dry 72 hours before applying.
- Coverage: 100-150 sq. ft. per quart.
- Clean up with mineral spirits or paint thinner.
- COMBUSTIBLE! Dispose of all rags according to manufacturer’s instructions.
Please note that this item can only be shipped by UPS Ground to addresses within the continental United States.
|
| |
Customer Reviews and Photos for:
Watco Danish Oil Finish
|
Average Rating:
4.9
(15 customer reviews)
$17.99
Add your review...
|
|
|
1) Submitted by
Chris B., from McLean, VA
on 12/12/2011
Customer Rating:
A fellow woodworker told me about WATCO Danish Oil and all of its benefits. I gave it a shot on my first night stand project with cherry. I was really happy with how easy it was to apply and manage. I applied a total of 4 coats, allowed each to dry with #0000 steel wool in between coats. Really great non-streak, non-blotchy finish. The photo above is the final product. It should also be stated that I applied a coat of satin poly, followed by a light misting of semi-gloss poly spray. I then finished it off with paste wax. I'm new at this game and probably could have gotten away with a less-intensive series of coats after the Danish Oil, but was really pleased with the end result. I would certainly recommend Danish Oil to anyone looking for an easy, mess-free, hassle-free finish.
|
|
2) Submitted by
John Organ, from Hector, AR
on 2/13/2011
Customer Rating:
On this cedar chest I used a mixture of one part natural danish oil, one part tung oil, and one part polyurethane. I applied 2 coats. By adding poly and tung oil it gives it a gloss. I have used this same ratio with cherry danish on cherry wood and walnut danish oil on oak and walnut.
|
|
3) Submitted by
Nancy Beagle, from Blue Springs, MISSOURI
on 2/2/2011
Customer Rating:
I used this product back in 1970 at my new house. When I left 11 years later my woodwork looked just as good as it did when I put it on. It is great and always looks good. The best is that you don't have to put a finish over it. Just a good paste wax will do if you want.
|
|
4) Submitted by
Alan Oakley, from Nicholson, PA.
on 1/16/2010
Customer Rating:
If you want a professional finish with the least amount of hastle then Danish Oil meet the demand. I often recomend it to my friends.
|
|
5) Submitted by
Ronald Buchanan, from Dayton, TX
on 12/21/2008
Customer Rating:
This has a mellow tone and need not be polyurethaned. Better than a stain and it can be sealed. Already have another customer wanting it also.
|
|
6) Submitted by
Judy Jones, from Idaho Falls, ID
on 10/24/2008
Customer Rating:
I am refinishing an antique vanity. I stripped all the layers of old paint off and went to find some Watco in town here - couldn't find the correct color - there were very few options. Against my better judgement I bought some Minwax and used it. It was just terrible. I hated the finish! I stripped the Minwax and ordered Watco from you - the finish is just beautiful and I am so proud and happy with the results. I will forever be a faithful customer!
|
|
7) Submitted by
Patrick McIntyre, from Marietta, GA
on 10/19/2008
Customer Rating: 
I have used the product for years on oak and pine and found the texture and finish to be great final product. I have found that if you apply the natural and then add a color you can lighten the color for the piece. The natural acts as a sealer that prevents to much of the color of a second coat to penetrate to deeply as a result it give a lighter appearance.
|
See all
15 reviews...
|
Home  Finishing, Sanding, and Glues Clear Finishes Watco Danish Oil Finish 
|
(0 Items)
