Home Power Tools and Shop Accessories Table Saws and Table Saw Accessories Table Saw Miter Gauges, Tenoning Jigs and Fences Thin Rip Tablesaw Jig


Only at Rockler Thin Rip Tablesaw Jig

Thin Rip Tablesaw Jig

$26.99Each   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 4.2  (101 customer reviews)


See More Images View Product Video
Rockler Advantage


Ball bearing guide keeps your stock running smoothly

  • Overview
  • More Info
  • Reviews
  • Videos
Bookmark and Share  
This jig allows you to rip thin strips on the left side of the blade, eliminating the danger of pushing narrow strips between the saw and fence. Since the strip is not trapped between the blade and fence, there is also less risk of binding and kickback. It’s simple to use; a single knob locks the jig into the miter track and locks your setting at the same time. Ball bearing guide keeps your workpiece firmly against the fence for perfect repeatability. Use the graduated scale to fine-tune for extremely thin strips.

Note: Ripping thin strips requires the use of a zero-clearance insert. Guard and splitter were removed here for illustration purposes only.

Bookmark and Share  
The perfect tool for edging, inlay, bent laminations and more.
  • Solid phenolic for durability.
  • Low-profile miter track clamp locks in at any point along the miter track.
  • Also works great on the bandsaw as a single-point fence for cutting curved slats in multiples.
  • Adjusts from 1-3/8" away from your miter track to 5-11/16" away from your miter track, enough for the thinnest rips
  • Measures 5-1/4"W x 8"L.
  • The jig is stationary, while the fence is moved for each cut.
  • Fits 3/4" W x 3/8" D Miter Tracks
 
Bookmark and Share  

Customer Reviews and Photos for:
Thin Rip Tablesaw Jig

Average Rating:
Customer Review Rating: 4.2
4.2
(101 customer reviews)
$26.99

Add your review...
1) Submitted by Terry, from Walnut Creek, CA on 6/1/2013
Customer Rating: Customer Review Rating: 5.0
My neighbor decided he wanted to build a strip canoe. I had the table saw. I was a little unsure about ripping 20' long red cedar boards into consistent 1/4" strips. Saw this jig and decided - for the cost - it would be worth a try. It worked and worked well. We even had to set it up again later to cut some more 20' boards and the strips came out just like the others.
2) Submitted by Richard, from Edmonds, WA on 4/5/2013
Customer Rating: Customer Review Rating: 4.0
Works as advertised, used it to cut trim 1/4" thick strips from a Maple board - and they match!
3) Submitted by Phillip Alenduff, from Greenwood, IN on 11/29/2012
Customer Rating: Customer Review Rating: 5.0
I have used this several times to rip 1/16" thick strips of hard maple, oak, and poplar with amazing success each time. The stability of the fixture with the table saw fence has resulted in perfect pieces each time. I enjoy using this jig. It works great. I'd highly recommend this item to anyone wanting to cut thin strips accurately.
4) Submitted by Rami, from Simi Valley, CA on 6/17/2012
Customer Rating: Customer Review Rating: 4.0

I just bought this. It looks and feels real good. I have not had a chance to use it yet. It fits my table saw and band saw.
5) Submitted by Helton Bare, from Oakland, CALIFORNIA on 2/26/2012
Customer Rating: Customer Review Rating: 5.0
I use this on both my bandsaw and table saw and get excellent results that I have been unable to get consistently using other methods. The position of the jig determines the thickness of the cut and you move the fence each time and get perfectly equal cuts. I save a sample to use as a setup guide to reproduce the exact width cut time after time with no measuring, test cuts, or frustration.

You can't go wrong with this jig it is not a gimmick like some jigs you get suckered into getting, this is the real deal it works better than you could hope for. I don't ask it to do anything but give me perfectly even strips for edge banding and it does this beautifully. Used on the bandsaw with the roller placed about 1/2 inch before the blade you get perfectly even cuts end to end every time.
6) Submitted by Wolf Unger, from Edgewater, FL on 2/20/2012
Customer Rating: Customer Review Rating: 5.0

I was initially concerned about the ability to replicate thin cuts with great accuracy for edge banding with this. I made a built-in DVD storage cabinet that needed edging on the shelves. I was stunned at how accurately I was able to make strips the same thickness. I think that it is imperative that you use a good fence system though, any inaccuracy would be born from a weak stock table saw fence! For me, the ability to make thin stock consistently but much safer made a believer out of me!
7) Submitted by Pete, from Nanticoke, PA on 1/20/2012
Customer Rating: Customer Review Rating: 5.0
The item does what it is suppose to do, safely. Solid and well built, ball bearing is a nice touch. However if it had an adjustable scale and pointer it would get a 6. Great price.
See all 101 reviews...
Bookmark and Share  

 
Order this Item
Jig:
Quantity Item Number Item Stock Status Price
36833 Thin Rip Tablesaw Jig
In
Stock 		$26.99 Each
Zero-Clearance Inserts:
Quantity Item Number Item Stock Status Price
69163 Craftsman Zero Clearance Inserts (Fits most Craftsman 10'' Belt Drive saws, verify size)
In
Stock 		$29.99 Each
69155 Jet/Powermatic 64 Zero Clearance Inserts (Will not work with Pow. #64 Left Tilt or JET Supersaw )
In
Stock 		$29.99 Each
69147 Delta Zero Clearance Inserts (for Right Tilt Saws Only)
In
Stock 		$29.99 Each



Home Power Tools and Shop Accessories Table Saws and Table Saw Accessories Table Saw Miter Gauges, Tenoning Jigs and Fences Thin Rip Tablesaw Jig
Locate Your Nearest Rockler Store

"What can I say? Easy...Rockler's one of the good guys:}< inclusive noun... the ladies I've talked too are as knowledgeable about their products as the guys! Keep up the great work."
- Les Delcambre - 09/30/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1