- Overview
- More Info
- Reviews
- Videos
Create rock-solid mortise and tenon joints with just your hand drill and this Beadlock® Kit. Patented system overlaps drill bit holes precisely to accept a special Beadlock® loose tenon. Ribbed tenon design prevents racking and increases the amount of precious face-grain glue surface. The result is an extremely strong, totally concealed joint. Included shim set allows you to mortise a variety of stock thicknesses, as well as to offset your mortises. Mortises in curved and tapered parts are simple. For narrow material, rip the tenon stock down to fewer ''beads.'' It's also ideal for reinforcing glass panel cabinet doors. Includes four .060" shims, two .030" shims, 3/8" HSS Drill Bit and a molded plastic case with added space for the optional accessory kits. All Accessory Kits include corresponding guide block, HSS drill bit and shim set.
Technical Details:
- Beveled cutout in the drill plate allows you to precisely align the jig with your reference marks.
- Handles stock thicknesses of 3/4" and up.
- Includes all necessary hardware for cutting 3/8" joints. (Tenon stock sold separately.)
- Storage case is molded with additional spacing for optional 1/4" and 1/2" drill block sizes (38088 and 34985, sold below).
What's in the Box?
- Anodized Drill Plate
- 3/8" HSS Drill Bit
- 3/8" Drill Block
- (4) 0.060" Shims
- (2) 0.030" Shims
|
| |
Customer Reviews and Photos for:
3/8'' Beadlock® Basic Starter Kit
|
Average Rating:
3.8
(29 customer reviews)
$29.99
Add your review...
|
|
|
1) Submitted by
Skip, from Rancho Palos Verdes, CA
on 1/24/2012
Customer Rating: 
I bought this to build a Walnut coffee table and a sofa table. About 16 joints in total. All came out perfectly using the 3/8 jig. Alignment was NOT a problem because I used an incra gauge to set up perfect registration. I used two ratchet clamps to hold the jig securely in place and facilitate quick release. Actually, this simple starter unit may be better than the pro in terms of secure clamping versus the small plastic knobs. Just bought the 1/4" add-on jig and quickly built two craftsman style 16x20 picture frames from quarter sawn oak. Another perfect alignment and secure joint without all of the hassle of mortise and tenon joints. Great product!
|
|
2) Submitted by
Kris W, from Denver, CO
on 10/14/2011
Customer Rating:
I bought this to make 4 chairs and absolutely love it. I promptly cut off the tab so I could use a depth collar. I used 30 joints per chair. So 120 joints later-240 mortises,1,920 drilled holes, everything is dandy with no issues or mistakes. I plan on getting the pro model sometime as I can see using both jigs for unlimited joinery. The joints are rock solid and easy to align after practicing on scrap. I'm just mad I didn't think of this simple jig first.
|
|
3) Submitted by
Lee, from St Paul , MN
on 12/21/2010
Customer Rating:
I purchased the jig along with the 1/4 block which I used almost exclusively for my first project. I had no problems with the 1/4 lining up or drilling correctly. Two high chairs with no screws in them whatsoever later, it worked excellent. The only down side is that I put drill stop collars on my bit to get fast, consistent holes. The stop curved top piece of the jig does not have clearance for drill stops for the last holes. I removed a portion of the block to accommodate this. It takes a little more attention especially since I ripped all the stock to five beads instead of seven for this project. Very pleased.
|
|
4) Submitted by
Boris, from Cocoa Beach, FL
on 12/18/2010
Customer Rating:
Very easy to use, works as advertised.
|
|
5) Submitted by
Beth, from Edmond, OK
on 7/11/2009
Customer Rating:
Easy to use right out of the box. I built a ship's wheel using the 3/8" starter kit. I reduced the width of the tenon stock on my bandsaw by two beads to fit the angles of my curve and then drilled only one hole in "A" and two in "B" to create the mortises. The jig worked well clamped into my bench vise and made the task go quickly.
|
|
6) Submitted by
Carl, from Gaffney, SC
on 5/3/2009
Customer Rating:
Works as advertised, quick and easy.
|
|
7) Submitted by
H.M., from Grand Rapids, MI
on 8/14/2012
Customer Rating: 
I used the jig for the first time to make two doors from poplar. Generally speaking it is a good tool, but it would be better if a adjustable reference fence were added to the jig. The reference fence would set on first cut and the rest of the boards could be set for drilling using the fence. I didn't want to score the wood with an awl since it will be painted and the mark could be seen. Using a very sharp pencil still means mistakes can occur and pieces will not line up. I'm going to take it to a machinist to see if he will add the reference fence.
|
See all
29 reviews...
|
Home  Hand Tools and Shop Accessories Jigs, JIG IT's and T-Tracks Jigs and Rockler JIG ITs 3/8'' Beadlock® Basic Starter Kit 
|
(0 Items)
