- Overview
- More Info
- Reviews
- Videos
Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials.
Application: Decorative edging for cabinets, molding and furniture
- Add distinctive design to cabinets, furniture, plaques, and millwork with these decorative edging bits.
- Cuts all composition materials, plywoods, hardwoods, and softwoods.
- Use on hand-held and table-mounted routers.
 | Freud's Quadra-Cut™ Router Bits Feature an Exclusive 4 Cutter Design! For the cleanest finish for routing the edges of hard or soft wood, woodworkers can look to Freud’s new Quadra-Cut™ router bits. These unique, patented bits employ four cutting edges, versus the industry standard of two, for a flawless finish on the most delicate of materials. Two of the carbide cutters have an upshear angle to remove most of the stock. Then the pair of downshear cutters make a final cut to produce an ultra clean edge. Industry standard bits that only have two cutters can leave fuzz and splinters on the top surface, especially in cross grain cuts, but Freud’s new Quadra-Cut bits leave a surface that requires no sanding or rework. | | Freud Cove and Bead Bit Dimensions |  | Application: Decorative edging for cabinets, molding and furniture.
| | (Click "More Images" above for a larger image) |
| Rockler # | Freud # | Overall
Dia. (D) | Carbide
Height (h) | Shank
Dia. (A) | Overall
Height (H) | Bearing
Dia. (B) | Radius
(R1, R2) |
|---|
| 21108 | 38-312 | 1-5/32" | 5/8" | 1/2" | 2-9/16" | 3/8" | 1/8" | | 33987 | 38-314 | 1-9/16" | 23/32" | 1/2" | 2-3/4" | 3/8" | 1/4" |
| Rockler # | Freud # | Overall
Dia. (D) | Carbide
Height (h) | Shank
Dia. (A) | Overall
Height (H) | Bearing
Dia. (B) | Large
Radius (R1) | Small
Radius (R2) |
|---|
| 34931 | 38-362 | 1-1/2" | 5/8" | 1/2" | 2-1/2" | 1/2" | 1/4" | 5/32" |
|
| |
Customer Reviews and Photos for:
Freud Quadra-Cut Cove and Bead Bits
|
Average Rating:
5.0
(13 customer reviews)
$49.47
Add your review...
|
|
|
1) Submitted by
Kelly, from Enosburg, VERMONT
on 4/24/2011
Customer Rating:
I bought this bit because it is the closest I can get to match the rest of the trim in our old farm house.
I recently acquired some 100+ year old Douglas Fir, that I saved from a remodel job at a paper mill building. Just so happens that my farm house used the same wood throughout.
I had recently added a closet and the matching trim from this wood and bought this bit to match the top trim.
This bit went through this 100+ year old wood, and if anyone knows Douglas Fir when it is dry it tends to be very susceptible to splitting and chipping.
This Freud Quadra cut made a clean well formed Cove and Bead in this wood! Well Done Freud!
I recommend the Quadra Cut router bits to anyone looking for router bits, I know this is all I will buy now!
|
|
2) Submitted by
R.E. Garside, from Foresthill, CA
on 2/17/2011
Customer Rating:
Easy setup with great finish on Oak. Just a little fine sanding. What a great price!!!
|
|
3) Submitted by
Donald M Harrison, from Inver Grove Hts, MN
on 1/19/2011
Customer Rating:
Incredibly smooth with only minimal chipping on red oak.
|
|
4) Submitted by
Monty C, from Las Vegas, NV
on 9/4/2009
Customer Rating:
By far the best router bit I've used. Super smooth cutting, zero tear out, and almost no sanding.
|
|
5) Submitted by
Skip Hula, from Hazen, AR
on 12/23/2008
Customer Rating:
Summed up in one word. Freud! What else is needed!
|
|
6) Submitted by
Chuck Carey, from Orangevale, CA
on 12/13/2008
Customer Rating:
I'm giving this bit an excellent since I've used Freud bits before. I restore antique furniture and have a radia missing about 12' run of molding. This came as close to any to matching the needed profile.
|
|
7) Submitted by
Gary Wedgner, from Weeki Wachee, FL
on 12/12/2008
Customer Rating:
I have been buying other makes of router bits but you haven't got a good one until you have a Freud, these bits are head and shoulders above the others. No black burn marks to sand for hours just a great clean cut. Highly recomended.
|
See all
13 reviews...
|
Home  Routers and Accessories Router Bits Ogee Router Bits Freud Quadra-Cut Cove and Bead Bits 
|
(0 Items)