- Overview
- More Info
- Reviews
- Videos
Freud's exclusive Quadra-Cut™ 4 cutter design provides the smoothest cuts possible. You'll get crisp, clean edges every time, even with cross-grain cuts in difficult materials. Rounding over bit applications: Soften furniture edges and create decorative rounded edges.
- Use rounding over bits to soften furniture edges and to create decorative rounded edges.
- Cuts all composition materials, plywoods,
hardwoods, and softwoods.
- Use on hand-held and table-mounted portable routers.
 | Freud's Quadra-Cut™ Router Bits Feature an Exclusive 4 Cutter Design! For the cleanest finish for routing the edges of hard or soft wood, woodworkers can look to Freud’s new Quadra-Cut™ router bits. These unique, patented bits employ four cutting edges, versus the industry standard of two, for a flawless finish on the most delicate of materials. Two of the carbide cutters have an upshear angle to remove most of the stock. Then the pair of downshear cutters make a final cut to produce an ultra clean edge. Industry standard bits that only have two cutters can leave fuzz and splinters on the top surface, especially in cross grain cuts, but Freud’s new Quadra-Cut bits leave a surface that requires no sanding or rework. | | Freud Quadra-Cut Rounding Over Bit Dimensions |  | Application: Soften furniture edges and create decorative rounded edges.
| | (Click "More Images" above for a larger image) |
| Rockler # | Freud # | Overall
Dia. (D) | Carbide
Height (h) | Shank
Dia. (A) | Overall
Height (H) | Bearing
Dia. (B) | Large
Radius (R) |
|---|
| 38546 | 34-122 | 1-1/8" | 1/2" | 1/2" | 2-1/2" | 1/2" | 5/16" | | 32104 | 34-126 | 1-1/2" | 3/4" | 1/2" | 2-3/4" | 1/2" | 1/2" | | 32693 | 34-127 | 1-3/4" | 7/8" | 1/2" | 2-7/8" | 1/2" | 5/8" | | 37039 | 34-128 | 2" | 1" | 1/2" | 2-7/8" | 1/2" | 3/4" | | 39650 | 34-132 | 2-1/2" | 1-1/4" | 1/2" | 3-1/8" | 1/2" | 1" | | 29174 | 34-138 | 3-1/4" | 1-9/16" | 1/2" | 3-3/8" | 1/2" | 1-3/8" | | 31240 | 34-140 | 3-1/2" | 1-3/4" | 1/2" | 3-5/8" | 1/2" | 1-1/2" |
|
| |
Customer Reviews and Photos for:
Freud Quadra-Cut™ Rounding Over Bits
|
Average Rating:
4.8
(10 customer reviews)
Add your review...
|
|
|
1) Submitted by
Alex Pihut, from Austin, TX
on 2/24/2011
Customer Rating:
The great cutting action of this bit allows you to speed up the process with smooth results and almost no tear out on end stock.
|
|
2) Submitted by
Butch McKeehan, from Spartanburg, SC
on 8/7/2009
Customer Rating: 
after first ordering one to try I had to order more for my inventory they save me of time than any one thing I have used
|
|
3) Submitted by
Butch McKeehan, from Spartanburg , SC
on 7/20/2009
Customer Rating:
I don't know how this bit could be better, but Maybe, I love it, my sanding time has been drasticly reduced because of the smooth cuts.
|
|
4) Submitted by
Hal Belle Isle, from Crownsville, MD
on 5/8/2009
Customer Rating:
I agree with the other comments here. Definitely a smoother cut that with the two blade but I had been using.
|
|
5) Submitted by
Kermit Huttar, from Deer Isle, ME
on 4/15/2009
Customer Rating:
These bits give a super smooth surface. I'll be adding more to my collection.
|
|
6) Submitted by
Steve, from Kihei, HI
on 2/19/2009
Customer Rating:
There is a huge difference between high quality bits and normal bits. This bit is very high quality. It cuts smoothly, no vibration, no muss, no fuss. Love it.
|
|
7) Submitted by
Carl Kemp, from Mandeville, LA
on 12/27/2008
Customer Rating:
I recently purchased the 1/2in Round-over Bit to go w/ the 5/16 in I owned previously. I have cut pine, cypress, walnut, and oak; in all cases the cuts have been clean and w/o splinters/ fuzz. Definitely worth the money.
|
|
8) Submitted by
Richard Ojeda, from Schinveld, LIMBURG, NETHERLANDS
on 4/22/2008
Customer Rating:
I would definitely recommend this bit. If all the new quadra-cut bits cut like this then I will be purchasing more. The cut is smooth with no tear out or burns. Even across the grain it cut smoothly. Well worth the money.
|
|
9) Submitted by
Joe Merry, from Fenton, MI
on 3/31/2008
Customer Rating:
I made a safety gate for our grandson out of white oak, as our staircase is 48" wide. The quadra cut roundover bit put a beautiful finish on the edges with no splintering or burning. I am so looking forward to Freud making more quadra cut bits. I will be definitely purchasing more in the future.
|
|
10) Submitted by
Gerald Clare, from San Luis Obispo, CA
on 1/30/2008
Customer Rating:
I'm making stair treads out of bamboo plywood and used the Freud roundover bit to make the bullnose. I was concerned about chipping as the saw splintered the wood a lot. The router bit cut it cleanly.
|
Home  Routers and Accessories Router Bits Cove and Round Over Router Bits Freud Quadra-Cut™ Rounding Over Bits 
|
(1)