Rockler Pattern Flush Trim Bits for Plunge Routers

Bearing guide is located on the shank side of the blade, and has the same diameter as the blade, making this the perfect choice for template work when the template is above the worked material (if using a hand-held router in the conventional way). Available in three sizes. Click "More Info" Tab for specific dimensions.

Item No. A B C 33136 1/2'' 1'' 1/4'' 35612 3/4'' 1'' 1/4'' 35244 3/4'' 1-1/4'' 1/2'' 33466 3/4'' 1-3/4'' 1/2'' 37348 1'' 1-3/4'' 1/2'' A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life. If you are not 100% satisfied with these bits, send them back for a refund. These larger bits are designed to be used in a router table. Router Safety Tips: It's easy to prevent mishaps if you take a few simple precautions. 1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.

Customer Reviews and Photos for: Rockler Pattern Flush Trim Bits for Plunge Routers Average Rating: 5.0 (1 customer review) Add your review...

1) Submitted by Austin V, from Layton, UTAH on 5/20/2009 Customer Rating: Works great. I have the 3/4 dia x 1/2" shank. It's a bit long at times but that can be over come. I'm made a lot of grooves with.