4'' FlexForm™ Dust Collection Hose

Introducing a brand new approach to dust collection! A unique, segmented design allows FlexForm Hose to twist, bend, expand and/or collapse to a desired shape and length, then firmly hold that position — resulting in virtually unlimited versatility. This ability to bend around obstacles, expand or contract to perfectly fit a given space, and maintain its shape makes FlexForm Hose ideal for tight spots and tricky dust collection applications where conventional hose just won’t work. You’ll find countless ways to use this clever product. Available in both 2-1/2" and 4" diameter sizes.

Additional features/specifications: Expands to three times its collapsed length, from approximately 12" to 36" Made from durable polypropylene plastic.

Customer Reviews and Photos for: 4'' FlexForm™ Dust Collection Hose Average Rating: 4.3 (15 customer reviews) $19.99 Add your review...

1) Submitted by Don, from Mineral Wells, TX on 7/29/2011 Customer Rating: I am installing a new 4" dust collection system in my shop and I had a very difficult turn that I had to run my piping around. This hose worked great.

2) Submitted by Jeremy, from Minneapolis, MN on 7/3/2010 Customer Rating: I orginally purchased this for my drill press, but it works so well collecting dust right off the mitersaw blade I haven't moved it since. I am able to get the hose to stay real close to the back of the blade for good pickup while easily being able to adjust it went needing to swing the blade. I fixed the far end to a small board that is easily clamped to the tool/bench of choice for support where ever needed for a portable solution. Great tool for pin-point dust pickup.

3) Submitted by Bill Buchanan, from Cinnaminson, NJ on 2/16/2010 Customer Rating: I like it because it's easy to bend into the shape that you need. I use it on my table saw where the dust port is about 4" off the floor. It works very well and allows the remaining hose to lay on the floor. I haven't had a hose tear since I have installed it.

4) Submitted by Dan, from Park City, UT on 10/5/2009 Customer Rating: I have the 2 1/2" version set up for my drill press and mortise cutter. In a word, this unit is SWEET.

5) Submitted by Mike Rapolas, from Winter Haven, FL on 7/10/2009 Customer Rating: I love it. When you need a small piece of hose and it is form fitting...perfect. I will buy more. Great stuff.

6) Submitted by Dan, from Montrose, PA on 12/21/2008 Customer Rating: Why didn't I know about this before. I got one 3 foot long section and plug it into any of several drops, and it does just what I want, without pulling on whatever it is near or connected to (router top, collecting tube, drill press, and so on.) Happy woodworker.

7) Submitted by John from MD on 3/22/2010 Customer Rating: I recently purchased 2 more of the 4" version, and these things are GREAT!!! I've been waiting for something like this to come along to use for my drill press, mortiser, and lathe, and rockler did it. they stay in position once i fire-up my cyclone, and just work perfectly on my drill press. I would HIGHLY recommend these, as you will find uses for them you may not have initially. I've got an overhead guard on my tablesaw with a DC port on it, I use the 2 1/2" version on here so I can extend the hose to rotate the guard out of the way when I need to -- just works great, and I don't need to disconnect anything -- just an example.

See all 15 reviews...