Pack Rack™ Clamp & Tool Storage System

More than just a clamp rack, this is a full-service mobile work station and storage solution! Load both sides to the hilt with clamps, and use the interior space to store everything from air compressors to dust collectors. Four included hooks make it simple to install a shop-made storage shelf, while four high-quality polyurethane casters let you roll the entire rig anywhere in the shop. The heavy-duty 5/8" diameter steel rods are strong enough to hold a full row of clamps and simultaneously support a shelf filled with tools. The steel rods can be repositioned in 13 mounting holes. Solid steel construction for maximum strength and stability. Uses carriage bolts for one-wrench assembly.

We're excited about the new Pack Rack's space-saving and shop-organization potential, and we can't wait to hear what you think!

Click here to download revised instructions.

Additional features: Large shop users who move a lot of tools around the shop will love the Pack Rack’s™ mobility and storage capacity. It works equally well in a small shops, where organization and storage are crucial 31''L x 24''W x 58''H Accessories: Steel Top Cap (25020) creates even more storage space on top of the rack. Additional Shelf-Hooks (20873) allow for more catchall interior storage. Additional Clamp Rods (22130) add clamp-holding capacity. Long Clamp Rods (20303) extend to the side, allowing you to store longer clamps. Includes: Heavy duty steel A-Frame body 8 zinc-coated 5/8" diameter steel rods 4 steel Shelf-Hooks 4 casters (2 locking, 2 non-locking)

Pack Rack Instructions (revised)

Customer Reviews and Photos for: Pack Rack™ Clamp & Tool Storage System Average Rating: (4.7) (42 customer reviews) Add your review...

1) Submitted by Jim, from Chanitlly, VA on 10/3/2009 Customer Rating: Outstanding. In over 35+ years of woodworking I've looked for good clamp storage solutions, built a few, used garage & basement spaces creatively, but never had a solution that so well fulfilled my needs as the Pack Rack. I bought the basic system and 2 sets of longer clamp rods, 2 extra shorter clamp rod sets, 1 extra shelf support hardware system (giving a bottom and 2 mid-level shelves), and the top tray. As noted variously by others: ONE This is the first time I've had all of my clamps in one place at one time (34 bar clamps 2' - 4' long, 12 pipe clamps 2'-4' long, 14 vice-grip clamps from 6" - 36" long, 20 spring clamps 2" to 8", 16 woodscrew clamps from 4" to 12" (and one 16"... why one and why 16"? don't know), 6 web clamps, 24 6" c-clamps, 12 miscellaneous sized c-clamps, 4 corner clamps, 4 corner clamp squares, a 4' 2-sided clamp and a few other miscellaneous clamps; TWO Its nice to easily pull the clamps to the work than the other way around; and THREE I've reclaimed about 12' of very important wall space that was not mobile. I too am looking at buying another rack system to store several other tools and long items (e.g., straight edges, t-squares, 3' to 4' drill bits and drill bit extensions, wall fish-rod sections, router & saw fences & mitre guages, etc., etc.). It takes an outstanding tool like this, a Shopsmith, a top-notch router table, or something equally remarkable for me to stop using it long enough to write about it.

2) Submitted by Jim Elliott, from Paulden, AZ on 9/24/2009 Customer Rating: The Pack Rack was just as advertised. A well built strong system for storing clamps and other items. Follow the assembly instructions exactly and you will have no trouble putting it together in an hour or so. I filled it up in no time. I bought 2 extra sets of shelf hooks and have cleaned out 2 drawers full of hand clamps and other unrelated items. I can wheel it anywhere in the shop and work off it conveniently. I bought extra rods but so far haven't needed them but I'm sure I will figure out something to hang on them. Thanks Rockler for another fine product.

3) Submitted by Dale C. Maley, from Fairbury, IL on 6/14/2009 Customer Rating: I have struggled for over 30 years to store all my woodworking clamps carefully and neatly. I bought the Rockler stand and put it together last Christmas. I have enjoyed it every since. It allows me to access the type of clamp quickly....and allows me to quickly clean up the shop and return the clamps to their proper storage location. Great product! Rockler Clamp Stand Finally Stores Clamps Properly

4) Submitted by James Clawson, from Dover, OK on 4/18/2009 Customer Rating: Great system for organizing clamping equipment.

5) Submitted by Rich Morrison, from Bristol, TN on 4/12/2009 Customer Rating: This is a great invention. I have thought about building a clamp rack for a long time, but it is much easier to buy one from Rockler and assemble it without all the bother of designing and drilling one yourself. Aside from putting a few bolts in the wrong holes, assembly is a snap. The only problemm I had was that one of the top crosspieces was made backwards, so it would not fit properly. I called Rockler and was lucky enough to speak to Casey. She promised that they would send out a new part promptly and they did. I received it about three or four days later. No complaints from me. Great product & great service.

6) Submitted by Dave Martin, from Creswell, OREGON on 4/7/2009 Customer Rating: This is a very good product all that it was cracked up to be. Easy to put together if you follow the directions. Rolls very well on my concrete floor. Found that I had alot more clamps than I thought after I dug them out of all the places they were hidden filled the whole rack.

7) Submitted by Bill Lyman, from Fripp Island, SC on 3/27/2009 Customer Rating: I have been going to build my own traveling clamp rack, but have too many projects that need to be done to stop and do it. Meanwhile the clamps were stuck here and there around the shop. This rack went together as the instructions said to do it in an hour or so. It is sturdy and well built with great wheels and rolls nicely around the shop with clamps.

See all 42 reviews...