- Overview
- More Info
- Reviews
Sam Maloof, one of America’s most accomplished woodworkers,
has used these same finishes on pieces placed in museums and
the White House. Sold in pint and quart size cans.
|
''One of the most important aspects of finishes, I
believe, is that they invite me to touch, to caress, and to
take pleasure in the wood surface.'' Sam Maloof.
Maloof’s Poly/Oil Finish A custom blend of polyurethane
varnish and natural oils developed by Sam Maloof to
beautifully finish his finest pieces. Ideal for use on
furniture, cabinets and millwork. Enlivens wood grain and
adds warmth to it’s color. Gives your project the look of
hand rubbed satin finish in half the time it takes using
pumice and rottenstone. Consider using Sam Maloof's Oil/Wax
for the final coat to complete the look.
Sam Maloof Oil/Wax Finish A blend of oils and waxes used
as a final coat over the Sam Maloof's Poly/Oil finish to
create a soft hand rubbed appearance while enlivening the
wood character. Sam recommends using this topcoat on fine
pieces that won't be exposed to heat or moisture. Applied
with a cloth.
For more information on Sam Maloof, see Jeremy Adamson's
book, The
Furniture of Sam Maloof, the first thorough
documentary of Maloof's life and work.
|
| |
 |
|
Customer Reviews and Photos for:
Sam Maloof's Finishes
|
Average Rating:
5.0
(23 customer reviews)
Add your review...
|
|
|
1) Submitted by
Michael Benson, from Walker, MN
on 4/24/2013
Customer Rating:
I recently finished my version of a Maloof style rocker and used this finish. This finish adds great depth, warmth, and character to walnut. As I began to apply the first coat, the walnut rocker was transformed from just a rocker to an invitation to touch. Easy to use and very reasonable odors. The finish provided an excellent reward for the hours of prep sanding.
|
|
2) Submitted by
Trevor Lindsey, from Camarillo, CA
on 9/10/2012
Customer Rating:
As a professional luthier of 32 years, I had sought an alternative to environmentally detrimental finishes that required spraying and/or laborious wet sanding and multiple coat build up. Nothing I had tried could be applied evenly or had acceptable wear resistance. Then I found the Maloof Poly/Oil, and it has not only made my work easier, but also provided a superior finish for my instruments. There is nothing else like it on the market, and it outperforms any other poly finish by miles.
|
|
3) Submitted by
James Adams, from Pawnee, OK
on 6/23/2011
Customer Rating:
A friend of mine gave me a sample of the Sam's oil in a small jar. I love the stuff. It's very easy to apply and I love the way it makes stuff shine. I use it only on very hard woods. I'm a wood turner and I buff my stuff after applying the oil.
My only problem is after a few openings the can no longer seals good. Then it starts to dry out. I hate to put it in Mason jars, but I think that is what I'm going to do with it.
|
|
4) Submitted by
Mel, from San Antonio, TX
on 2/19/2011
Customer Rating:
If you follow the directions that say to wipe off the finish at least twice after applying it, you cannot make a mistake with this productif you leave too much it can make sticky spot that never quite dries. I refinished all my kitchen cabinets with this stuff and the finish looks perfect. No streaks, no brush marks, no blotches. The result looks truly professional and has stood up to some rather harsh treatment. I'll never buy another brand, because there is no skill needed to apply it and the results are great every time.
|
|
5) Submitted by
Peter Hart, from Menlo Park, CA
on 11/22/2010
Customer Rating:
For decades I used the classic shop-made 3-part finish: Equal parts of alkyd resin varnish, boiled linseed oil and turpentine. I've tried other commercial preparations, but always went back to the 3-part finish. This time, having just visited the Maloof Foundation home in Southern California, I decided to try these two companion products.
I didn't quite follow the recommendation on the can for applying the oil finish. I applied four coats successively with 320, 400 and finally 600 grit wet/dry abrasive paper. Other than that, I followed the directions.
The results met my high expectations as far as appearance goes. I have not yet used it for high-wear applications like chairs or dining tables so can't comment on durability for those cases.
The product was easy to apply and more importantly easy to wipe off. It's easier to deal with than mixing up your own, but it is expensive stuff. On the other hand, a small amount goes quite a long way.
These two finishes are in my opinion superior to the older commercial preparations. I'm a convert, I'll be using this from now on.
|
|
6) Submitted by
John H. Mead, from Monroe, NH
on 5/17/2010
Customer Rating:
There is little I can add to the roster of favorable reviews. However, this is an expensive product, and I have learned how to gain full benefit while being stingy, that is - economical. My first two or three coats of finish will be Watco, which fills the pores at limited expense. It lacks sheen however, which two coats of Maloof poly/oil will provide. I repeat the counsel of others who advocate careful wiping.
|
|
7) Submitted by
Michael, from San Francisco, CA
on 5/13/2010
Customer Rating:
Followed the directions in their entirety (both poly/oil and oil/wax), and I couldn't be happier with the results. For very little effort, this is an amazingly beautiful finish. Used on natural walnut.
|
See all
23 reviews...
|
Home  Finishing, Sanding, and Glues Clear Finishes Sam Maloof's Finishes 
|
(0 Items)
