Dust Right® Master System

This system of dust control accessories has everything you need to revolutionize the way you clean up shop. The secret is the innovative Dust Right® Handle. One end accepts standard 4" dust hose, while the other is perfectly sized to slip in and out of the different Dust Right® components. Just keep the Handle attached to your dust collector and you can move from task to task like never before. The included Tool Port fits on any 4" dust port for easy direct collection, and the Floor Nozzle combines with the 36" Extension Wand to keep floors spotless. The system also includes a smaller Bench Nozzle, a StableGate™ blast gate with a wall-mounting bracket to keep the hose organized, plus four spring clips to hang everything up and out of the way. Patent pending.

Additional features: The Tool Port features a flexible rubber boot on one side that guarantees a tight connection and allows for slight variations in the size of the tool’s dust port. Requires a metal hose clamp to connect to tool (sold separately). The Floor Nozzle includes a built-in filter grate to keep large particles from entering your dust collection system. The StableGate™ blast gate prevents unwanted movement when opening the gate. It features multiple screw holes to allow for mounting in any direction.

Customer Reviews and Photos for: Dust Right® Master System Average Rating: 3.7 (51 customer reviews) $69.99 Add your review...

1) Submitted by David Breen, from Loudon, TN on 3/13/2011 Customer Rating: My large shop is certainly a lot cleaner now that I have this Dust Right Master System. It is so easy to use and store that I hardly use my shop vac any more.

2) Submitted by Mike, from Pickerington, OH on 3/6/2011 Customer Rating: I have set this system up to make the most out of my small shop. My shop is in my basement, and to make room for everything, most of my tools have to be on mobile bases. I was able to mount my dust collector a Jet 1.5 HP in the corner permanently, and run one dust right 21' hose directly out of there. The other inlet into the dust collector goes to piping that runs up the wall, and across the room, where it meets another dust right hose, 14' long. I also have a standard floor sweep next to the dust right hose. The dust right hose is great because I can store it out of the way, and extend it to meet up with my mobile tools. Since I have 2 hoses, I keep one almost always hooked up to my table saw, while the other goes from band saw, to router table, to bench top sweep. Great product!

3) Submitted by Jim McFadden, from North Wales , PA on 11/27/2010 Customer Rating: Overall I am very pleased with this product. Takes a little getting used to with the hose size, etc but well worth the trade off, it's like a shop vac on steroids. My small home shop has never been kept cleaner,easier.

4) Submitted by Roger, from Saltillo, TN on 3/19/2010 Customer Rating: I'm still trying to get my shop system finished, of which this will be a part of. Have only got to play with it a little bit but very impressed with it so far. Will provide a lot of flexibility and fill a need not taken care of by the typical dust collection system.

5) Submitted by Ted Noelle, from Blairsville, GA on 8/9/2009 Customer Rating: I had a shop wide system that I was just not pleased with because it did not have enough power to collect all the dust and saw dust/chips from lathe. When I saw the dust right advertised, I thought that might be the answer to my problem and indeed it is. I built the roll around cart for the system with some modifications and have made some modifications to the dust right system. On the floor sweep, I removed the grill because I have a cyclone collector in front of the vacuum system which collects all the big pieces in a trash can. I also added switches on the most used pieces of equipment that connect to a lone ranger switch system that originally was hooked up to the gates on my old system. This saves a lot of steps turning on and off the collector. All in all, I am very pleased with the dust right system because it has really reduced the dust in the air. Thank you.

6) Submitted by Jody Maple, from West Springfield, MA on 8/9/2009 Customer Rating: I have only had it for a couple weeks, but it has already been helpful. I was using a solid piece of landscaping pipe and it was not a flexible as I had hoped. This has made all the difference in keeping dust and chips down.

7) Submitted by Gerald Sprouse, from Paso Robles, CA on 5/11/2009 Customer Rating: Very pleased with this tool(Dust Right system). I added a 21 foot hose for my table saw and use the 28 foot unit to clean the shop. Since wall space is limited in my shop I built an attachment for my table saw to store the wand and hose. Works great and moves with saw. I move my saw to the center of the shop for most projects. My dust collector has two 4 inch ports and I just open one and close the other to clean the area around the saw. (click to see full-size picture in new window)

See all 51 reviews...