Rockler rabbeting router bit includes bit and bearings for 5/16'', 3/8'', 7/16'' and 1/2'' rabbets. Allen wrench included. Vary cutting depth by changing bearings.
ROUTER
BIT DIMENSIONS
Two
flutes, Ball bearing guide.
Item
No.
A
B
C
D
Bearing
91584
1-3/8"
1/2"
1/4"
1-1/4"
3/8,
1/2, 5/8, 3/4
91595
1-3/8"
1/2"
1/2"
1-1/2"
3/8,
1/2, 5/8, 3/4
Made
with K10 and K20 grade carbide for clean cutting action and
final sharpened with 400 grit diamond wheels for longer cutting
life. Available in 1/4'' or 1/2'' shanks. Both with 1/2'' cutting
depth. Includes bit and bearing soft 5/16'', 3/8'', 7/16'' and
1/2'' rabbets for variable cutting depth. Allen wrench included.
A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality performance features include:
K10
and K20 grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
"I have been buying from Rockler for many years now. I have NEVER had a problem. Merchandise is as advertised, quality is exceptional, price is right, shipping and handling are top-notch. I have recommended Rockler to many friends and colleagues." -
Randy Rudd
- 06/01/2009 See more...
CART
Two
flutes, Ball bearing guide. 
If
you are not 100% satisfied with these bits, send them back for
a refund. 
These
larger bits are designed to be used in a 
