Related Products
|
- Overview
- More Info
- Reviews
Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
Includes smaller bearing and wrench for beading applications at no additional charge.
Items with * in the description are larger bits that should be used in router tables at reduced RPM.
 These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations. |
|
| |
Customer Reviews and Photos for:
Roundover/ Beading Router Bits
|
Average Rating:
(4.9)
(12 customer reviews)
Add your review...
|
|
|
1) Submitted by
Bert Forest, from Norwood, MA
on 12/1/2009
Customer Rating:
I used a 1/4 inch shank 3/8-inch round over bit to complete my storage cabinets base. I was pleased with the ease of use and the results.
|
|
2) Submitted by
Steven D. Morton, from Salem, MO
on 11/8/2009
Customer Rating: 
I am repairing the belfry and steeple of a church built in 1881. I have had to repair and replace several parts that were not standard mill pieces. This Rockler bit allowed me to manufacture a structural yet ornate trim to match the existing trim, and maintain the historical integrity of the structure. It has been a tedious yet rewarding project, helped in part by Rockler's inventory of excellent tools.
|
|
3) Submitted by
Daryl's Custom Woodshop, from Tulsa, OK.
on 10/2/2009
Customer Rating:
Very good quality bit and I'm looking forward to purchasing more.
Custom daybed for a client built in my shop.
|
|
4) Submitted by
Jeff , from Lafayette, AL
on 6/11/2009
Customer Rating:
The bit was sharp and performed as expected.Quality product,Reliable,big cut.
|
|
5) Submitted by
James Zytowiecki, from Brunswick, OH
on 1/17/2009
Customer Rating:
Quality product. Reliable, well built. Lasts me months using same bit weekly over hundreds of uses before needs resharpened.
|
|
6) Submitted by
John, from Savannah, GA
on 8/1/2008
Customer Rating:
The router bit arrived properly packaged and protected from potential shipping damage and rust. The bit was sharp and performed as expected.
|
|
7) Submitted by
Ray Age, from Joelton, TN
on 5/4/2008
Customer Rating:
When adding a 1/16" accent round there's not much room...or time...for chatter. Nothing left to do but light sand & finish. Great bit, Rockler!
|
See all
12 reviews...
|
Home  Power Tools and Shop Accessories Routers and Accessories Router Bits Cove and Round Over Router Bits Roundover/ Beading Router Bits
|
|
CART
Two
fultes, Ball bearing guide Bearing 1/2"
Get
a great deal on these superior bits!
If
you are not 100% satisfied with these bits, send them back for
a refund. 
