QuickSet Pressure Adapters

Finally, a simple replacement for the tedious double-nut fitting on most hold-down toggle clamps! Change depth-of-pressure in seconds with the adjustable rubber foot, and for movement in-and-out along the arm just loosen a single set screw and adjust away. A comfortable locking knob caps it all off. Available in two sizes, 5/16" and 1/4", based on bolt-diameter. 5/16" adapter’s inside dimension: 5/8" x 11/16". Inside dimension of 1/4 adapter: 9/16" x 9/16". Featured on all of our new toggle clamps! Patented.

Customer Reviews and Photos for: QuickSet Pressure Adapters Average Rating: 4.9 (8 customer reviews) $3.99 Add your review...

1) Submitted by Sanford Phillips, from Stanwood, WA on 1/18/2011 Customer Rating: I bought these for my coping sled which came with toggle clamps with the nut and bolt. These definitely cut my setup time and work great.

2) Submitted by Bic , from Georgetown, TX on 9/30/2009 Customer Rating: These are a great idea. They really make the adjustment of the clamp a quick and easy process.

3) Submitted by David, from Austin, TX on 1/23/2009 Customer Rating: This is a great product and it makes adjustment so much quicker and with less use of tools. I have retrofitted most of my jigs with these adaptors.

4) Submitted by David, from Phoenix, AZ on 1/13/2009 Customer Rating: I have purchase a few of both sizes of these and have retrofitted some of the clamps I have (the ones I'm currently using the most). These are a major improvement to any clamp they fit, and the fact that all the new clamps will have these is great. I will eventually retrofit all of my clamps that need to be adjusted on a continual basis.

5) Submitted by Matthew Jones, from Omaha, NE on 12/28/2008 Customer Rating: To tell you the truth, I purchased these adapters to use on an aftermarket coping sled. The Delta sled that I purchased for my shaper was wobbly and the clamps were poorly designed and potentially dangerous. The Rockler adaptors are a major design improvement both in time saving and safety!

6) Submitted by Dan, from Park City, UT on 12/14/2008 Customer Rating: If you have the old style clamps (the ones with a "Good Hand" logo stamped on one side, and their model number on the other), the 28153 will work great with a little effort on your part. You'll have to grind the logo and model number sides of the clamp down a bit. But after that, you are good to go. The fine folks at Rockler helped me out with this, so kudos to them! If you have some of those old "Good Hand" clamps and a grinding wheel, this adaptation will make you life a little easier (and us old folks like that idea).

7) Submitted by Ed, from Seattle, WA on 11/27/2008 Customer Rating: I can now use my toggle clamps! The old system was so ackward to use that my clamps sat in a drawer, unused. Now, with the Rockler Quickset Adapter, I am using my toggle clamps daily.

See all 8 reviews...