Top quality router bits that meet the high standards of Rockler Woodworking and Hardware.
ROUTER BIT DIMENSIONS
Two fultes, Ball bearing guide. Bearing 3/8"
Item No.
A
B
C
D
R
91430
3/4"
3/8"
1/4"
1-1/4"
3/16"
91441
7/8"
3/8"
1/4"
1-1/4"
1/4"
91452
1-1/8"
1/2"
1/4"
1-1/4"
3/8"
91474
1-3/8"
5/8"
1/4"
1-1/4"
1/2"
91485
3/4"
1/2"
1/2"
1-1/2"
3/16"
91496
7/8"
1/2"
1/2"
1-1/2"
1/4"
91507
1-1/8"
1/2"
1/2"
1-1/2"
3/8"
91518
1-3/8"
5/8"
1/2"
1-1/2"
1/2"
91529
1-5/8"
3/4"
1/2"
1-1/2"
5/8"
91540
1-7/8"
7/8"
1/2"
1-1/2"
3/4"
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.
Quality performance features include:
K10 and K20 grade carbide for clean cutting action.
Final sharpening with 600 - 800 grit diamond wheels.
Precision balanced for smooth operation.
Baked-on anti-stick coating to reduce pitch and resin buildup.
Get a great deal on these superior bits!
Buy 3 or more and get 10% off, or buy 6 or more and get 15% off.
If you are not 100% satisfied with these bits, send them back for a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
Jim B, from Leesburg, GA
on 9/24/2008
Customer Rating:
I bought the 3/8' Radius X 1/2' H Cove Router Bit and have bought several other bits from Rockler. They have all performed great.
2) Submitted by
John, from Savannah, GA
on 8/1/2008
Customer Rating:
The router bit arrived properly packaged and protected from potential shipping damage and rust. The bit performed as expected. It even contained an additional bearing to allow a slightly different profile.
"Oh how I wish there was a Rockler someplace close to my home. I've bought so much since I found out about them on-line that they are a permanent "button" on my desktop." -
Mike Ryan
- 08/30/2009 See more...
CART
Two fultes, Ball bearing guide. Bearing 3/8"
Get a great deal on these superior bits!
If you are not 100% satisfied with these bits, send them back for a refund. 
These
larger bits are designed to be used in a 
