A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality
performance features include:
K10
and K20 grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
If
you are not 100% satisfied with these bits, send them back for
a refund.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
"I purchased 4 sets of Steel Table Legs at a huge discount! More than 50% off compared to what I thought was already a good deal from another online store. Had to cancel that one and thankful I found this site. My hours of searching online paid off. " -
Jet Vida
- 08/29/2012 See more...
Routers and Accessories 
(1)
If
you are not 100% satisfied with these bits, send them back for
a refund. 
