A
fantastic value on high quality router bits. These bits are
competitively priced while offering high performance and long
life.
Quality
performance features include:
K10
and K20 grade carbide for clean cutting action.
Final
sharpening with 600 - 800 grit diamond wheels.
Precision
balanced for smooth operation.
Baked-on
anti-stick coating to reduce pitch and resin buildup.
If
you are not 100% satisfied with these bits, send them back for
a refund.
These
larger bits are designed to be used in a router
table.
Router Bit Set-Up Jigs - Set your
router bit to the precise height every time! Simply bring the router bit up through
the table and align the jig with the cutting edge of the bit.
Router
Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.
1) Rockler recommends using 1/2'' shank router bits whenever possible.
1/2'' shanks provide better stability with less vibration to produce a smoother
cut and longer cutter life. 2) Make multiple light passes rather than one heavy cut. 3) Install your router bit so that 90% of the shank is inside the
collet. Here's a rule of thumb: fully insert the bit, then pull it back
1/16 to 1/8 of an inch. 4) Use a router table whenever possible. 5) When using large diameter bits, reduce the RPM of your router.
Then test your set-up on scrap lumber. 6) Always follow your router manufacturer's recommendations.
1) Submitted by
Katherine Torgerson, from Washington, DC
on 1/14/2008
Customer Rating:
We used this on a set for the play 'Major Barbara' by George Bernard Shaw. We needed to save a little money on muttons and mullions for some windows and this bit worked great we were able to route out pine windows after they were built to save time and money on detail work.
"I was given your website by a sales accocciate in a box store,while looking for a specific prouduct, He told me you were priced right and had quality products. I ordered the items I needed and am very pleased to say I agree with him." -
Ray Grismer
- 03/10/2013 See more...