The Dust Right® centerpiece! This handle connects to 4" hose and fits tightly
over any Dust Right® component for simple, one-handed shop cleanup. Click
"More Images" above to see it in action.
Customer Reviews and Photos for:
Dust Right® Handle
|
Average Rating:
3.1
(19 customer reviews)
$13.99
Add your review...
|
|
|
1) Submitted by
Michael Case, from Watertown, MA
on 9/20/2012
Customer Rating: 
I have a very complete, but somewhat small shop. Some of my machines simply have to be mobile. The ability to hook them up to one interchangeable hose is a great convenience. Yes, you need to buy an adapter for each machine, but the adapters provide a uniform friction fit and rotate as well. The Dust Right has worked out great for me.
|
|
2) Submitted by
Ed, from Washington, MI
on 4/15/2012
Customer Rating:
I have been using the Dust Right System since it was introduced. Prior to 'Dust Right', I was fighting the battle of finding compatable 'FITS' for fitting of the so called same size components. The actual fitting sizes varied from tool to tool and dust collection fittings. Once I found the Dust Right System components,almost all my 'connection issues were solved. I found that picking the correct match-up for each tool port swivel and non-swivel made all the difference. Also, I found that a 'quick wipe' inside and out on the components between uses, eliminates any 'sticking issues' when removing the handle from the connectors. A little planning goes a long way to a satisfactory experience.
|
|
3) Submitted by
Jon, from Escondido, CA
on 2/25/2011
Customer Rating:
Excellent product. I read the other reviews! it must be that the product has been updated. The complaint of it being too hard to separate is not the case for me. They fit very closely, yet slide off easily. Near air-tight connection. I've switched all my connections over to Dust Right because how well and how easily they work. My only negative is that I'd like to see a "non handle" connection for extension hoses and for wall connections.
|
|
4) Submitted by
Fred Hair, from Colorado Springs, CO
on 4/19/2010
Customer Rating: 
The handle, in conjunction with the fittings that go on the tools, work great! My dust collector must be moved from tool to tool. This set-up takes the pain out of the process.
|
|
5) Submitted by
Ron, from Holland, MI
on 4/19/2010
Customer Rating:
A basic adapter that works like it should. Fortunately, I realized at the time of order, that you need the tool adapter as well so I ordered two of them so I can connect to my cabinet saw and connect to a reducer for my smaller vacuum hoses used for general cleanup. I find the four inch hose is too heavy for general use.
|
|
6) Submitted by
J, from Raleigh, NC
on 3/18/2009
Customer Rating:
This is a great idea, and works OK in conjunction with other Dust Right stuff. However, it does not work with standard 4" dust ports on my tools - it's too big. I wanted to be able to move it from table saw to router table to jointer, but their standard 4" dust ports are incompatible. You have to buy a separate adapter to go between the handle and the tool port. Why couldn't they just make this standard size?
Editor's note: That's a good question J.
First, we have to consider tool ports on woodworking machines. As much as we'd like them to be, the fact is they are NOT standard in size. There are slight variations in size from manufacturer to manufacturer and tool to tool. Note that our Dust Right Tool Ports are not an all plastic mold. They are designed specifically with a rubber boot as an integral part of them, which gives the flex needed to fit the variations of port sizing manufacturers produce. To secure that flexible rubber boot to the molded plastic part of the fitting a minimum depth of lip is needed for a proper grip of rubber to plastic. By offering the Dust Right Tool Ports we are supplying a way to bring the non-uniform sizing of machine ports to a uniform size so that one can easily use the Dust Right Handle to switch from machine to machine.
|
|
7) Submitted by
John Bynum, from Knoxville, TN
on 6/26/2009
Customer Rating:
These products do exactly what I wanted. I connected on of the adaptors to may Jet planer and the other to my Olvier spindle sander. The handle unit fot the 4" hose perfectly and connnected to the adaptor units.
|
See all
19 reviews...
|
Home  Power Tools and Shop Accessories Dust Collection Dust Right Quick Release Fittings Dust Right® Handle 
|
(0 Items)
