Home Routers and Accessories Router Bits Stile and Rail Router Bits Bead Stile and Rail Router Bit Set


Bead Stile and Rail Router Bit Set

Bead Stile and Rail Router Bit Set

$99.99Each   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 4.0  (4 customer reviews)




View Larger Image View Product Video
Rockler Advantage



  • Overview
  • More Info
  • Reviews
  • Videos
Bookmark and Share  
Stile and rail router bits for beautifully crafted frames. Top quality bits that meet the high demands of Rockler Woodworking and Hardware.

Bookmark and Share  

Two flutes, Ball bearing guide, Bearing 5/8", Groove: 3/8" D x 1/4" H.

 
Item No. A B C
91947 1-3/8'' 1'' 1/2''
A fantastic value on high quality router bits. These bits are competitively priced while offering high performance and long life.

Quality performance features include:

  • K10 and K20 grade carbide for clean cutting action.
  • Final sharpening with 600 - 800 grit diamond wheels.
  • Precision balanced for smooth operation.
  • Baked-on anti-stick coating to reduce pitch and resin buildup.

100% GuaranteeIf you are not 100% satisfied with these bits, send them back for a refund.
Router Bit Set-Up JigsThese larger bits are designed to be used in a router table.

Router Bit Set-Up Jigs - Set your router bit to the precise height every time! Simply bring the router bit up through the table and align the jig with the cutting edge of the bit.


Router Safety Tips:
It's easy to prevent mishaps if you take a few simple precautions.

1) Rockler recommends using 1/2'' shank router bits whenever possible. 1/2'' shanks provide better stability with less vibration to produce a smoother cut and longer cutter life.
2) Make multiple light passes rather than one heavy cut.
3) Install your router bit so that 90% of the shank is inside the collet. Here's a rule of thumb: fully insert the bit, then pull it back 1/16 to 1/8 of an inch.
4) Use a router table whenever possible.
5) When using large diameter bits, reduce the RPM of your router. Then test your set-up on scrap lumber.
6) Always follow your router manufacturer's recommendations.
 
Bookmark and Share  

Customer Reviews and Photos for:
Bead Stile and Rail Router Bit Set

Average Rating:
Customer Review Rating: 4.0
4.0
(4 customer reviews)
$99.99

Add your review...
1) Submitted by David T., from Cypress, CA on 12/29/2009
Customer Rating: Customer Review Rating: 5.0
I made the doors for a china hutch (still in progress) using these bits, and got clean cuts in red oak as long as I used a backer board to control chipout on the exit side of the cut. The joints fit air-tight, and the bearings make positioning the router table fence a breeze.

Lower half of a china hutch in red oak.
(click to see full-size picture in new window)
Product Review for Bead Stile and Rail Router Bit Set - Rated 5 Stars
2) Submitted by Steve Adams, from Murrysville, PA on 10/29/2007
Customer Rating: Customer Review Rating: 5.0
I have used the router bit set in the building of kitchen cabinet doors and found them to be excellent. The matched set is perfect in fit and cutting was smooth. Good quality product...
3) Submitted by Mike Bond, from Bartonville, TX on 2/9/2010
Customer Rating: Customer Review Rating: 4.0
I was unsure about using my P-C #691 router at full speed, so I bought the Rockler speed controller. It works just fine, but I was almost at full speed for the cleanest cut anyway!! I also tried taking a 1/2 depth cut first, as I was concerned about the power of my router, but it cut full depth with no problem. I also used the set-up jig, which is a great help, and obtained a really good fit on my first set-up. Excellent stuff altogether.
4) Submitted by Royce Flowers, from Winchester, NH on 2/22/2008
Customer Rating: Customer Review Rating: 2.0
This set is nicely matched, it makes very tight joints. However, I did have a hard time getting clean cuts on maple, it made an excesive amount of tearout along the profile. I tried various router and feed speeds but non of which helped. They cut great on pine and okay on oak. I have since purchased a set from diffrent company and have been using those.
Bookmark and Share  

 
Order this Item
Bits Set:
Quantity Item Number Item Stock Status Price
91947 Bead Stile and Rail Router Bit Set 1-3/8'' Diameter X 1'' High (1/2'' Shank)
In
Stock 		$99.99 Each
Router Bit Set-Up Jig:
Quantity Item Number Item Stock Status Price
53779 Router Bit Set-Up Jigs for 91947 Bead Bits
In
Stock 		$7.69 Each



Home Routers and Accessories Router Bits Stile and Rail Router Bits Bead Stile and Rail Router Bit Set
Locate Your Nearest Rockler Store

"I purchased 4 sets of Steel Table Legs at a huge discount! More than 50% off compared to what I thought was already a good deal from another online store. Had to cancel that one and thankful I found this site. My hours of searching online paid off. "
- Jet Vida - 08/29/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1