Customer Reviews and Photos for:
Centerline® Series CL-766 75 lb. Full Extension Drawer Slides
|
Average Rating:
2.8
(13 customer reviews)
Add your review...
|
|
|
1) Submitted by
Thad Kresho, from New Kensington, PA
on 9/12/2011
Customer Rating: 
Once I got the hang of it, these are very easy to intall and they work great. I used the screws that are included and if you put them in the proper holes, all works well.
|
|
2) Submitted by
Jim Stock, from Paulden, AZ
on 3/28/2011
Customer Rating:
I can tell you that I made a lot of draws and never used this type of slide before. I only wish I would have years ago, there easy to install and work very well. I know the next set of draws are getting these slides from now on.
|
|
3) Submitted by
Tom Centofnti, from Florence, NJ
on 12/22/2010
Customer Rating:
Real Nice Work Well
|
|
4) Submitted by
Don Ciotti, from West Chester, PA
on 10/5/2010
Customer Rating:
Made a cabinet with three drawers. First time I have used Centerline Slides and they work great. Very easy to install and snap shut. Very smooth to open and close.
|
|
5) Submitted by
J Moe, from Mound, MN
on 3/26/2011
Customer Rating: 
The slides theirselves are great. The track mounting screws sent with them are useless. The heads are to big to get through access holes to install them. These days it costs more for the gas to go to the hardware store to get screws than the screws!
|
|
6) Submitted by
Doug, from Rice Lake, WI
on 4/9/2011
Customer Rating:
The slides themselves are fine but the screws that come with them are not. As already mentioned, the heads are too big around to fit through the access holes in the slides. I drilled out the access holes but there's no reason the screw heads need to have that large of a diameter. I could have used other screws I had on hand but if you're going to include them in the kit at least make them work.
|
|
7) Submitted by
Jeff Garth, from San Diego, CA
on 10/9/2011
Customer Rating:
Glides are good, but the screw heads are larger than the opening where the screws go! They need to add instructions on how to install the screws!
|
|
8) Submitted by
Tom, from Whitman, MA
on 3/3/2012
Customer Rating:
The slides themselves are GREAT. the reason that I gave them 2 stars are the mounting screws. as other's have said the heads on them were too large to fit into the slide's access holes. After 20 minutes of frustration it was nice to see I wasn't the only one. Now I'm taking a trip to get screws that will work.
|
|
9) Submitted by
Jim Dryfoos, from Allendale, NJ
on 3/30/2012
Customer Rating: 
Slides seem good, but I find the screw heads to big to insert through the intermediate assembly in order to attach the cabinet member. This is no problem for the back position as can slide the intermediate forward, but can not do this with forward or middle positions. Wondering if others who have not had this problem got different screws. Going to try grinding the heads down some. Won't buy again as too much hassle.
|
|
10) Submitted by
Mike Solan, from Tucson, AZ
on 10/27/2012
Customer Rating:
Hard to believe, but the screws supplied are too big for the front 2 access holes on the slider. The slides are fine, but it is very frustrating when the supplied parts do not work. Fortunately I had some Accuride screws from a prior project.
|
|
11) Submitted by
Phil Emmerth, from Wheeling, WV
on 1/18/2013
Customer Rating:
The head of the screw that were provided are too large to fit through the hole. Had to use screws that I had from other projects.
|
|
12) Submitted by
Dave
on 2/10/2013
Customer Rating:
he screws supplied are a mess. Very frustrating. Also, mine came with too much sticky grease. When you take them apart to install the grease gets all over. It is very sticky on your hands, and on top of the screw fiasco, I had to wash my hands over and over. Would never buy again.
|
|
13) Submitted by
Ron Murphy, from Peconic, NY
on 4/3/2009
Customer Rating:
Installed 5 pair on two nightstands: one with four drawers, the other with a single drawer. They have a very solid feel and a very smooth operation. Installation was very easy. I've used Accuride slides in the past. I'll use these from now own. Great product.
|
Hardware 
(0 Items)
