- Overview
- More Info
- Reviews
These low-profile slides deliver standard performance for less — perfect for
light-duty home/kitchen/office applications where budget and quality are
key. 75-pound load capacity. Bright zinc chromate finish.
Additional features/specifications:
- Lever disconnect
- Ball-bearing action
- Closed-position hold-in
- 32 mm hole pattern
- Non-handed
- Requires 1/2" side clearance
Found only at Rockler, Centerline® drawer slides are an economical option
for
standard quality performance. Instructions and
mounting hardware included.
|
| |
Customer Reviews and Photos for:
Centerline® Series CL-766 75 lb. Full Extension Drawer Slides
|
Average Rating:
2.8
(13 customer reviews)
Add your review...
|
|
|
1) Submitted by
Thad Kresho, from New Kensington, PA
on 9/12/2011
Customer Rating: 
Once I got the hang of it, these are very easy to intall and they work great. I used the screws that are included and if you put them in the proper holes, all works well.
|
|
2) Submitted by
Jim Stock, from Paulden, AZ
on 3/28/2011
Customer Rating:
I can tell you that I made a lot of draws and never used this type of slide before. I only wish I would have years ago, there easy to install and work very well. I know the next set of draws are getting these slides from now on.
|
|
3) Submitted by
Tom Centofnti, from Florence, NJ
on 12/22/2010
Customer Rating:
Real Nice Work Well
|
|
4) Submitted by
Don Ciotti, from West Chester, PA
on 10/5/2010
Customer Rating:
Made a cabinet with three drawers. First time I have used Centerline Slides and they work great. Very easy to install and snap shut. Very smooth to open and close.
|
|
5) Submitted by
J Moe, from Mound, MN
on 3/26/2011
Customer Rating: 
The slides theirselves are great. The track mounting screws sent with them are useless. The heads are to big to get through access holes to install them. These days it costs more for the gas to go to the hardware store to get screws than the screws!
|
|
6) Submitted by
Doug, from Rice Lake, WI
on 4/9/2011
Customer Rating:
The slides themselves are fine but the screws that come with them are not. As already mentioned, the heads are too big around to fit through the access holes in the slides. I drilled out the access holes but there's no reason the screw heads need to have that large of a diameter. I could have used other screws I had on hand but if you're going to include them in the kit at least make them work.
|
|
7) Submitted by
Jeff Garth, from San Diego, CA
on 10/9/2011
Customer Rating:
Glides are good, but the screw heads are larger than the opening where the screws go! They need to add instructions on how to install the screws!
|
See all
13 reviews...
|
Home  Hardware Drawer Slides and Drawer Parts Ball Bearing Drawer Slides Centerline® Series CL-766 75 lb. Full Extension Drawer Slides 
|
(0 Items)
