Besides delivering exact depth readings, this precision gauge features a remote
digital display that mounts up to 3 feet from the sensor! It’s perfect for router lifts,
and can also be used on shapers and other woodworking machines.
The gauge is accurate to within .001 inch, and displays its digital measurements in
either decimals (inches and millimeters) or fractions (inches). It has push-button
zeroing capability at any point. Powered by a CR2032 lithium battery.
Accuracy Specifications:
Decimal: +/- .001
Fraction: +/- 1/500
Metric: +/- .05
Additional Specifications:
Adapts to most commercial router lifts.
Requires drilling two small holes in your machine (drill bit supplied).
Includes sensor, display, battery, 3 foot cord and all mounting hardware.
1) Submitted by
Ronald, from Macomb Twp., MI
on 3/21/2009
Customer Rating:
I had to make some adjustments in the mounting to fit my lift. I have a "JessEm" "ROUT-R-LIFT". I am looking forward to using it with my pin router jig. I mounted the read-out on the wall as my table is against a wall. Read out is very easy in this arrangement.
Customer Rating:
I find that I often like to set-up my router table to repeat profiles after I have removed a specific bit. Now, I install the router bit in the machine and set it flush with the table, then zero-out the Wixey and adjust exactly the same way each time. If I need adjustments, I just record the same offset for the future. Caution when installing the cartridge on your router lift - make sure it will not extend beyond measuring rule when the router is fully dropped. Nice family company with good email customer service.
"My wife found this store for me and now we both use it whether we drive up to San Berdo or use the internet. Either way these people take great care of you. So tell your friends and family you found the right place for your wood working needs!" -
doug
- 09/09/2009 See more...
CART
(4.0)
