Jet® 14'' 1.25HP Deluxe Bandsaw

The all-new JWBS-14DXPRO 14" Deluxe Bandsaw from JET (shown here with optional fence) has been fully redesigned to meet the needs of today's most demanding woodworkers. Gone are the days of adding a riser block; this 14" bandsaw comes with a massive cast iron frame for increased power that makes it ready to meet all resaw expectations head-on. Couple this incredible feature with a new high tension spring design and many more amazing features, and you have a bandsaw that will last for years to come. Put a new JET 14" Bandsaw in your shop and you'll know that JET tools are Built Better to Build Better.

• Built-in 12" resaw capacity for cutting larger pieces of wood
• 2 Speed poly-v belt drive system
• Newly designed upper and lower cast iron frame for increased strength and rigidity
• Easy to view blade tracking window
• Blade guide post with rack and pinion adjustment
• Upper and lower ball bearing guides reduce friction for longer blade life
• Quick release blade tension for convenience
• New enclosed stand with storage shelf and easy access door
• Built-in retractable blade guard moves up and down from 0-12” resaw
• New high tension spring design allows for greater blade tensioning

Product Specifications Model Number JWBS-14DXPRO Brand Jet Height 77" Width 28" Length 29" Net Weight 247 lbs. Cutting Capacity Width 13-1/2" Cutting Capacity Height 12" Minimum Saw Blade Width 1/8" Maximum Saw Blade Width 3/4" Blade Speed 1500/3000 SFPM Blade Length 105" Table Dimensions 15" x 15" Table Tilt 10 Deg. Left, 45 Deg. Right Table Height from Floor 43-1/2" Dust Port Outside Diameter 4" Dust Collection Min. CFM Required 300 cu.ft/min Stand Type Closed Wheel Diameter 14" Motor Power 1-1/4 HP Motor Voltage 115/230 V Prewired Voltage 115 V Motor Phase 1 Ph

32630 - Instruction Manual

Customer Reviews and Photos for: Jet® 14'' 1.25HP Deluxe Bandsaw Average Rating: 5.0 (2 customer reviews) $999.99 Add your review...

1) Submitted by Francis Coppage, from Edwardsville, IL on 12/17/2010 Customer Rating: Got this on the Black Friday sale. Been looking at it for a while. Seems that Jet put some real grassroots feedback into this one. 1. Built in 12" resaw 2. Carter style blade guides. 3. Accessible tension relief & tension adjustment no more busted knuckles. 4. 110/220 5. 2 speeds Assembly was a breeze Make sure you have a strong pal the 200 lb top end is not for the feint of heart. Makes it a real stable unit. Initial set-up was just as smooth. Still don't have a fence, but that has never stopped me in the past. A solid piece of hardwood and some clamps has worked for me for a long time. First re-saw went flawlessly ... 8" persimmon NO DRIFT AT ALL!!! I've heard nightmares about that. Blade changes were not bad ... can't imagine that ever being EASY. Just make sure you're ready to re-adjust the guides Upper are a cake walk, bottom ... tedious ... Still ... easier than blocks. No, Jet isn't paying me. They just have a winner here.

2) Submitted by Steve Simmons, from McMinnville, OR on 12/27/2009 Customer Rating: I'm an amateur woodworker with a home shop. I bought this bandsaw because I wanted a good bandsaw with the ability to do small resawing jobs but I didn't want to pay for the larger, more expensive saws. I also bought a Kreg fence and installed it. My test was as follows. I got a Lennox 3/4" bimetal blade, 2 tpi. I then took a piece of fiddle back maple 12" tall, 18" long and about 15" wide. I made three passes cutting 1" slabs. It performed very well! I was very pleased. I did have to go slow, but I expected that. The blade tracked very well and straight except right at the entrance to the cut. It had a bit of wobble until the entire blade got into the wood. After that it was very precise in it's cut. I am very pleased with my saw. It has performed well. I would buy it again in a minute.

View Product Demo