With a unique two-piece design, these brackets make it easier than ever to mount
casters to vertical panels. They attach through the sides of the panels for rock-solid
stability and will accommodate a wide range of panel widths. Each set includes
brackets and the necessary hardware to mount four casters.
Combine these Caster Brackets with any of the following:
|
These brackets are essential when mobilizing router cabinets,
platforms or other casework that lacks a horizontal base panel.
Specifications:
- Made from heavy duty aluminum
- Includes 4 two-piece brackets with nuts and bolts.
- Maximum stem diameter: 1/2''
- Minimum panel width: 5/8''
|
| |
Customer Reviews and Photos for:
Bench Dog® Caster Brackets
|
Average Rating:
4.1
(7 customer reviews)
$25.99
Add your review...
|
|
|
1) Submitted by
greg from PA
on 4/18/2011
Customer Rating: 
Very sturdy brackets. Will accept a large variety of Casters. Perfect for making havy shop cabinets mobile. Great to move cabinets around in the garage.
|
|
2) Submitted by
Arne Mortensen, from Kelso, WASHINGTON
on 12/31/2010
Customer Rating:
The bracket set is well designed and nicely made. It came with bolts that are too short for a 2x4. Given the strength of the brackets, one might anticipate that bolts for a 2x4 mounting would be included or that barrel nuts would be supplied to make the shorter bolts "universally" useful. I also added washers.
|
|
3) Submitted by
Bill Dalton, from New Orleans, LA
on 10/10/2010
Customer Rating:
The product does EXACTLY what it says it should do. I have a 2x4 constructed bench that I wanted to make mobile. These brackets provided me with a solid wont split wood solution.
My only critique is that I needed to go buy longer screws to get the brackets to work with 2x4's.
|
|
4) Submitted by
Julie, from Bend, OR
on 6/16/2010
Customer Rating:
I bought a desk that had the casters screwed into the particle board side panel that served as the desks' legs. The desk is pretty heavy, and when I moved it, the original caster bolts started splitting the wood and made the desk wobbly. These brackets completely solved my problem! With the extra support that the brackets provide, the desk is very sturdy and stable - no more wobbles. I would definitely recommend them.
|
|
5) Submitted by
Michael Turner, from Renton
on 4/4/2011
Customer Rating:
Excellent, except: what kind of sadist provides 1/4"-20 nuts and bolts with 10mm hexes? I spent about 10 minutes trying to find a wrench that would fit before I realized that only a metric wrench would work. The bolts are not M6 and the nuts go just fine onto my 1/4"-20 bolts.
|
|
6) Submitted by
Brad Tande, from Folsom, CA
on 5/3/2012
Customer Rating: 
Product not designed for medium to heavy loads, this is a light duty product. I attached these to my work bench and they appeared to work great. No stress issues, the bench rolled great. however, when I put some load on one end to test the benchs stability, i.e. to ensure it had a wide enough base, slip, roll or otherwish fail. One of the brackets failed and sheared right off, collapsing the bench. Total weight applied was my body wieght 200lbs on the corner that sheared.
|
|
7) Submitted by
Mark Harrington, from Granby, CO
on 3/15/2010
Customer Rating:
Very well designed brackets. They hold onto the plywood sides of my homemade router table very well. I like the way they are designed like small "L"s so that the sides sit on them and do not soley rely on the bolts for support. The brackets and casters together add 3 1/2 inches to the overall height of the table. The brackets came with nuts, bolt and lock washers. Shipped quickly and arrived in excellent condition as always - Thanks Rockler.
|
Hardware 
(0 Items)
