Taper / Straight Line Jig

If you’ve ever struggled to make a lengthy angled cut, this is the jig for you. With a simple indexed angle setting system, heavy duty hold-down clamps and a smooth sliding design, it makes tapered cuts fast, easy and precise. Perfect for chair legs, table legs and more. Plus, with the miter bar removed it doubles as a stable straight line ripping jig. Includes 36" miter bar. Measures 31-5/8'' x 7-3/4''. 1/2'' thick MDF.

Jig fits snug in any standard 3/8'' x 3/4'' miter slot and features a large, ergonomic handle for smooth push-action performance throughout the cut. Additional features: Indexing marks make angle setting easy — each mark represents 1° of taper. Dual tape measures provide convenient reference and also help set angles. Two wide-body hold down clamps prevent stock from drifting dangerously from your fence. Clamps have non-marring rubber caps for better grip. Three adhesive strips run across the jig to help stabilize your workpiece. With taper angle zeroed out, jig works great to rip straight edges on rough lumber.

Rockler Taper / Straight Line Jig Instructions

Customer Reviews and Photos for: Taper / Straight Line Jig Average Rating: (3.8) (13 customer reviews) Add your review...

1) Submitted by Jerry Kern, from Vancouver, WA on 11/21/2009 Customer Rating: After several years of putting up with a rinky-dink homemade tapering jig I finally bit the bullet. Armed with my $15.00 coupon I went to Rockler in Beaverton and bought this beauty. Took me 20 minutes to set it up and then another 30 minutes to cut 8 legs for my N gauge train setup table. I like it.

2) Submitted by Dick Scordato, from Mount Kisco, NY on 11/21/2009 Customer Rating: I finally replaced my shop-made jig and am very happy I did. This jig is very easy to assemble, very easy to use and ,most importantly, is safe to use because is securely hold the stock and the handle keeps your hands away from the blade. Sure you can make a jig like this, but I'd rather make finished products than jigs. The limitations are that is won't handle very wide or thick stock. But it is perfect for tapering table legs.

3) Submitted by Stephen Sprague, from Bloomington Springs, TN on 10/20/2009 Customer Rating: I found that I needed to route the T-bolt head gouges deeper by a sixteenth of an inch to clear the slide bar and traction pads. But, that done, the jig works very well.

4) Submitted by Dan Wolff, from Howell, MI on 9/13/2009 Customer Rating: Another great new product. I have a Jet Cabinet saw and using the outboard holes, it fit perfectly to my saw blade. I did not have to cut a thing on the jig. Easy to set up, the clamps are great and the handle gives great control. I can see me using this alot for thin straight-line cuts. The only thing I added to the jig was a 3/4" hole for hanging the jig on the wall.

5) Submitted by Stephen Kaufman, from Newtown, CT on 9/11/2009 Customer Rating: I have used my own shop made jigs for this kind of job, but this jig appears to the job better and is much more flexible. I can also visualize many other uses other than as a taper jig.

6) Submitted by Mark Sidor, from Churchville, NY on 9/9/2009 Customer Rating: I bought this jig for some window trim to our addition had to cut tapers 60 inch long verying for 1/8 to 3/8 taper for 6 different windows this jig worked very well and very easy to set up extremely well thought out for simplicity of use would recommend to any one.

7) Submitted by Al, from Clewiston, FL on 9/3/2009 Customer Rating: Even though I have a jig I did myself (plywood made with clamps) this one is more straight (MDF) and is more simple than mine which made me use it instantly. I can be use for different applications. I'm satisfy with it, because it is easy to handle. As any MDF jig or table I can have I added some oil first and then Shellac around the trim and where the parts move, in order to make it more compact and durable throughout the yrs of use.

See all 13 reviews...