- Overview
- More Info
- Reviews
These Hold Down Clamps feature non-marring rubber tips that are
ideal for working with soft woods, pre-finished panels, or anything that’s
already been prep sanded. The rubber clamp faces also help to grip the
workpiece for better safety and accuracy. In addition, they
have a wide aluminum body, allowing for maximum tension. Clamps include a
5-star knob and a 5/16" T-bolt designed to fit into T-tracks on drill presses,
router tables and more.
The Hold Down Clamp, 5-1/2"L x
3/4"W provides the same great features as the 5-1/2"L x 1-1/8"W
version, but in a slimmer width and without the non-marring rubber tips.
Technical Details:
- 5-1/2" long x 1-1/8" wide.
- Crafted of solid anodized aluminum.
- Clamps material up to 2-1/2'' thick.
- Rubber tips help grip and protect workpiece.
- 5/16'' T-bolt is compatible with our Universal T-Track.
Best Used With:
What's in the Box:
- (1) Hold Down Clamp, 5-1/2"L x 1-1/8"W
- (2) Non-marring rubber tips
- (1) Washer
- (1) 5-Star Knob
- (1) 3'' x 5/16'' T-bolt
|
| |
Customer Reviews and Photos for:
Hold Down Clamp, 5-1/2''L x 1-1/8''W
|
Average Rating:
4.0
(10 customer reviews)
$10.99
Add your review...
|
|
|
1) Submitted by
Darrell, from Pasadena, TX
on 7/18/2011
Customer Rating: 
You won't be disappointed with these clamps. I know I wasn't. I use them mainly at the drill press, but have also used them for holding pieces to my panel sled at the table saw. They hold pieces tightly and I have yet to have one slip on me. I don't think its fair for other reviewers to have dinged these clamps because the T-bolts didn't fit there drill presses. In my opinion, that has nothing to do with the quality of this product or how well it works. If the T-bolts don't fit your press, just grind them down till they fit or get T-bolts that will fit. I have the new delta press with the large adjustable table and they fit just fine. These clamps are a great product and will probably last forever whatever that is. Git Er Done!
|
|
2) Submitted by
Robert Bernier, from Alexandria, VA
on 6/16/2011
Customer Rating:
Works very well for hold down use. Would purchase again if need arises.
|
|
3) Submitted by
Roy Peterson, from Oconomowoc, WI
on 4/29/2011
Customer Rating:
I had some concerns, albeit minor, regarding the t-bolt heads fitting into my drill press table t-slots. Mine is a Delta with a cast iron table. The t-bolts fit without any grinding or modifying. The clamps have great pressure, hold well, and are convenient to use. Great product!
|
|
4) Submitted by
Charles, from Centennial, CO
on 9/5/2009
Customer Rating:
This clamp is exceptional for its purpose. I use it almost exclusively on my drill press but have been considering it for my router table, a use several others have found fruitful. Its compact design keeps it out of the way when maneuvering work pieces but it keeps a solid grip when needed. If you need something like this, get this one. There are others that have longer screw stems and bulkier hold downs that get in the way most of the time.
Highly recommended for a specific use.
|
|
5) Submitted by
Doug, from Lafayette, IN
on 3/5/2011
Customer Rating: 
Using for a Table Saw sled. Works Good.
|
|
6) Submitted by
Neal, from Jefferson City, MO
on 3/22/2011
Customer Rating: 
I bough some to use on my drill press table like the one in the photo, but the T bolts don't fit into my T-slots. Disappointed that I will have to grind them down to use.
|
|
7) Submitted by
Galen Carter, from Longmont, CO
on 4/21/2011
Customer Rating:
Clamps work very well. I needed to read description better. The clamps have a 3/16 inch T-bolt. These will not fit T-track designed for 1/4 inch T-bolt, which my drill press table had.
|
|
8) Submitted by
Doug
on 8/7/2011
Customer Rating:
They are very good quality. Just be sure you have the right sized t-track.
|
|
9) Submitted by
Danny H., from Santee, CA
on 10/10/2012
Customer Rating:
I have a couple of these and they work well on my drill press table. A decent value when they are on sale.
|
|
10) Submitted by
Ron, from Manchester, KY
on 2/13/2011
Customer Rating:
I bought my first set of these from Rockler on sale. Clamp is of good quality, however the t-slot bolt heads did not fit into the t-slot of the drill press table. I had to grind them down until they did. Now I use them every day.
|
Home  Hand Tools and Shop Accessories Jigs, JIG IT's and T-Tracks Jig Parts and T-Tracks Hold Down Clamp, 5-1/2''L x 1-1/8''W 
|
(0 Items)
