Dust Right® Router Table Dual Port

This ABS plastic port combines fence and cabinet dust collection for single-source extraction. Plus, with two slightly different sized fittings on the port’s open end, it accepts either 4'' dust hose or our Dust Right® Handle. For open stands, combine the Dual Port with the Dust Bucket.

One fitting to replace multiple reducers, hoses and other fittings Attaches easily to our Dust Right® Handle or standard 4'' dust hose Smaller vertical port accepts 2-1/2'' dust hose Rubber boot on cabinet end ensures a tight fit Includes one 4'' hose clamp

Dust Bucket Instructions

Customer Reviews and Photos for: Dust Right® Router Table Dual Port Average Rating: 3.7 (12 customer reviews) $15.99 Add your review...

1) Submitted by Leal, from Newcastle, CA on 6/19/2011 Customer Rating: I received the order, installed it, it work great! Very pleased with the results! No more sawdust!

2) Submitted by Bob Willing, from Crystal Falls, MI on 6/18/2011 Customer Rating: Just installed the Rockler dust right router dual port on my router table. I modified the port by adding a gate after the port and before it enters the router table. I added the gate because I noticed that I lost most of the vacuum on top of the table but had almost all of the vacuum under the table. Now I can open the gate by the router table so I can balance the amount of vacuum at both ends. One more advantage with the gate is that I can close the gate and remove the hose from on top of the table and vacuum the table top.

3) Submitted by Richard, from Lighthouse Point, FL on 10/5/2010 Customer Rating: An excellent idea. One problem was none of my 2.5 hose fittings fit. The outside fittings were too small and the inside fittings were too big. It was easily solved by adding a 2.5" coupler to the dual port with duct tape. Now all of my 2.5" fittings can be utilized. It's now on one of my router tables and doing an excellent job.

4) Submitted by Gary, from Novi, MI on 10/22/2009 Customer Rating: Saw one today at the local Rockler store and bought it because it looks like it will be an easy and efficient way to get dust collection from both dust ports on my router table with one connection.

5) Submitted by Kevin Jones, from Virden, IL on 6/21/2010 Customer Rating: I used this to connect my miter saw port together with a 12"x12" table saw hood that I mounted below my miter saw to collect dust from below the saw. It works just fine. The only thing I had to do was put screws in the 4" hose that came off the bottom of the Dual Port because I used a somewhat rigid hose and the Dual Port is slightly tapered so while tightening the clamp the hose kept sliding off. I think if I used a different type of hose this may not have happened but the hose I used was all I had. After a couple of screws the hose stayed on just fine. I would recommend it for other applications also. (click to see full-size picture in new window)

6) Submitted by Len Rogers, from Altavista, VA on 12/4/2009 Customer Rating: An excellent addition to my router table, I would recommend it. But be advised, you should consider ordering also the 34203 2 1/2" dust hose, AND 3" clamps, in case you don't have them. If your fence is a traditional one with a 2 1/2" dust pickup, as mine is, I also strongly suggest the 34654 2 1/2" hose adapter, so you can plug it in!

7) Submitted by JR, from York, PA on 11/10/2009 Customer Rating: Overall very good. The package says that the port "attaches easily to our Dust Right Handle..." It is a very sloppy fit.

See all 12 reviews...