Freud Entry Door Cove/Bead Style Bit Set

Additional features:

• Cuts all composition materials, hardwoods, and softwoods
• For use on table-mounted portable routers.
• Mininum 2 HP router required.
• 1/2'' Shanks

This set is easy to set up and use. It cuts very clean. I just finished my first interior door of solid white oak. I cut 2" tenons on the three rails. After cutting the copes on the rails, use the resulting tongue to set the stick bit. As always, set up on a scrap piece first. If the stick bit is set properly, nibbling a corner of the tongue on the coped set up piece should remove it cleanly with no "flash" remaining on top or bottom of the tongue. Also, if you are making long tenons, you can disassemble the cope bit as instructed for long tenons, and use just the lower bit for the entire cut of the coped ends, since you have to flip the board anyway. I'm very satisfied with the results.