Dust Bucket Dust Collection for Router Tables with Special Offer!

The Router Table Dust Bucket will capture nearly all routing debris when you use both bucket and fence attachments with the Router Table Dual Port (20225) and your 4" dust collection system. 4" port can be mounted on the back or either side for convenient access. Enjoy maximum dust collection while blind routing dadoes, dovetails and more. Features an easy-access door with magnetic catch for quick height adjustments and an adjustable vent for suction control to prevent boards from sticking. Bucket is easy to assemble and is keyhole slotted to attach to most router table tops. Galvanized steel components. Router Table Dust Bucket measures 13" W x 13" H x 10" deep. Fits most routers, including large plunge routers. Use only with a 4” dust collection system. The Dust Bucket will not work with a shop vacuum.

Dust Bucket Instructions

Customer Reviews and Photos for: Dust Bucket Dust Collection for Router Tables with Special Offer! Average Rating: 4.7 (21 customer reviews) $110.47 Add your review...

1) Submitted by Buno Pati, from Woodside, CA on 11/5/2012 Customer Rating: Great product! Well built. Screw holes line up perfectly for easy assembly. I am using this with a Incra Wonderfence and a 3HP cyclone DC. There are absolutely no observable uncollected dust or chips. Thanks!

2) Submitted by Norm Ruhoff, from Moscow, ID on 2/19/2012 Customer Rating: Finally...a dust collection solution for my router table! I have this mounted under the wing on my table saw I use for my router table and it works great. Assembly was easy, and I made a mounting bracket sealed with insulation strips. Absolutely no dust or wood chips miss the dust collector! Great product!

3) Submitted by Terry Quast, from Mount Pleasant, MI on 10/8/2011 Customer Rating: Every once in a while you run across a product of exceptional quality. The Dust Bucket is one of those items. Heavy weight steel construction where every screw hole lines up and assembles exactly as advertised. Put the dust collection on the left, right or back, it doesn’t matter, everything lines up perfectly. Don’t let some of the other complaints about the screws negatively influence you, the screws are perfect. Not being machine screws they don’t have sharp points, so there is no way to scratch or rack your hand while adjusting or installing your router. The phillips screw heads were no problem, I just used an electric screwdriver and it went together in 20 minutes or so. Another 10 to 15 minutes to turn the router table over, center the box left to right, and find 4 short, large head screws to mount the bucket to the table no screws are supplied, drill pilot holes and screw to the table. Very well thought out and manufactured to close tolerances. As far as functionality - it works as advertised. What more can one say other than it does an amazing job removing the saw dust.

4) Submitted by Stu Proctor, from Fullerton, CA on 3/6/2011 Customer Rating: This is an excellent product, it works just like it's supposed to. Assembly was very straight forward and simple with one exception. The phillips head screws provided are perfectly adequate for any place that two pieces go together. But where three pieces go together they wouldn't cut it so I used my own hex-head screws in those places, mostly along the bottom. I don't know how much it would cost to replace the provided screws with hex-head screws, but I think it would be worth it. Irregardless of the screws, I am very satisfied with the Dust Bucket and how well it works with the Dust Right system. I am also very pleased that the local Rockler store honored an on-line advertised deal that the store didn't have. It's no wonder Rockler is my favorite toy store.

5) Submitted by Gil Johnson, from Bakersfield, CA on 3/5/2011 Customer Rating: After reading the reviews, I recently purchased the "Dust Bucket Dust Collection for Router Table" I was pleasantly surprised by the heavy duty construction of the unit. I followed the assembly instructions that were provided and the unit went together without a hitch. By using an awl to allign the bottom screw holes, as the instructions advised, every hole lined up perfectly. Being able to configure the suction and vent attachments where you need them was great because the space I had to work with under my router table is limited. I did some routing today with a small dust collector attached to the collection box and my larger dust collector attached to the port on my Rockler fence. Ater routing about fourty feet of board I checked the box and it was empty, with a pinch of sawdust in the corners. I would highly recommend this product. I am VERY inpressed.

6) Submitted by Michael Spurgeon, from Raymore, MO on 2/25/2011 Customer Rating: Although I felt when ordering this dust bucket, it was over-priced, after receiving it, I changed my mind. The fit of the pieces and small holes for the screws ALL lined up perfectly AND it was manufactured from heavy gauge steel - far heavier than I assumed it would be. Construction, assembly, design and function all rate a 5. Now for the downside - NONE!!! If I could only capture dust like that with my Glidesaw

7) Submitted by Al Micucci, from Holbrook, NY on 1/31/2011 Customer Rating: I purchased this product for my Woodpecker router table & fence after making a complete mess of my shop he first time I used it. I had to mount the unit with the mounting ears to the inside and I also had to remove one of the under table braces and elongate the mounting holes. What a dream it was to use after that. A bit of dust on the top of the table but nothing below. I can't be too enthusiastic when recommending this product. I love it.

See all 21 reviews...