Home Power Tools and Shop Accessories Nailers and Staplers Corrugated Fastener Tool for Face Frame Construction


Only at Rockler Corrugated Fastener Tool for Face Frame Construction

Corrugated Fastener Tool for Face Frame Construction

$237.99Each   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 3.5  (4 customer reviews)


See More Images View Product Video
Rockler Advantage


Secure glued face frame joints Corrugated Fastener Tool includes safety goggles, lubricating oil and case Corrugated fasteners offer twice the strength of regular fasteners

  • Overview
  • More Info
  • Reviews
  • Videos
Bookmark and Share  
Make quick work of face frame construction, butt joints, cabinets, door and window construction and more. Corrugated fasteners work in hard and soft woods to draw joints together and offer twice the strength of regular fasteners. Fastener Tool drives 1/2" fasteners in 1/4", 3/8" and 1/2" lengths. Magazine is easy to load and adjust for different fastener lengths. Includes lubricating oil and safety goggles.

Bookmark and Share  
WARNING:
  • Read and understand tool labels and manuals. Failure to follow warnings could result in SERIOUS INJURY.
  • Operators and others in work area MUST wear safety glasses with side shields.
  • Keep fingers AWAY from trigger when not driving fasteners to avoid accidental firing.
  • Always have trigger lock on when tool is not in use.
  • Disconnect air when clearing a jam, servicing or when tool is not in use.
  • Do not use oxygen or combustible gases. Explosion could occur.
  • Do not exceed 100 psi.
  • Do not remove or alter safety.
 

Technical Documents
Bookmark and Share  

Customer Reviews and Photos for:
Corrugated Fastener Tool for Face Frame Construction

Average Rating:
Customer Review Rating: 3.5
3.5
(4 customer reviews)
$237.99

Add your review...
1) Submitted by Jeff, from Shingle Springs, CA on 3/9/2011
Customer Rating: Customer Review Rating: 4.0
I just got this and have tested it on various off cuts to see how strong it holds.

First, with about 90 lbs of air, it countersunk about and eighth of an inch in plywood. Much less in hardwood. But test it first on the same wood as the project or you'll be unhappy.

Second, it's a big tool - akin to a framing nailer. It's not small like a brad nailer. And it has some kick to it so be prepared.

Tool is made in Taiwan and somewhat OK on finish and fit. Not sure how it would hold up to rough use so go easy.

I love the idea of joining mitered corners without biscuits, splines, etc. Much easier to glue, clamp and shoot. I'll use this tool a lot I think and more as I learn it's capability.

Good purchase so far. Senco's model is twice the price.
2) Submitted by Cole, from Hawi, HI on 2/13/2011
Customer Rating: Customer Review Rating: 4.0
So far, I'm very pleased with this tool. I've used it for 2 weeks now, and run about 500 1/2" corregated fasteners through it without a problem. I use it to fasten the 45 degree corner joints on artist's stretcher frames made from 3/4" thick fir or oak. Determining the correct pressure for setting the fastener depth in the respective wood types takes a bit of time, but once dialed in is easily reproducible.
3) Submitted by Louis , from Flat Rock, IN on 11/24/2012
Customer Rating: Customer Review Rating: 2.0

The directions to set up and load is very lacking! on a scale of 1 to 10 is a 2 and I am being generous. Just hope it works better then the directions they give .
4) Submitted by Steve, from Bellingham, WA on 6/10/2010
Customer Rating: Customer Review Rating: 4.0
Liked product a lot. Plan on using it for a screen door and quick cabinet faces and doors for the shop. I was really surprised at the strength of a test joint in 2 scrap 2x4s. A lot harder to break the butt joint than I thought it would be (3 fasteners in each side). Fastener did crush surrounding wood into the fastener joint of soft fir, but think that planed (machined) fir or harder wood would fasten perfectly. Fasteners penetrated easily.
Bookmark and Share  

 
Order this Item
Fastener Gun:
Quantity Item Number Item Stock Status Price
31166 Excelsior Pneumatic Corrugated Fastener Tool
In
Stock 		$237.99 Each
Corrugated Fasteners:
Quantity Item Number Item Stock Status Price
35646 1/4'' Corrugated Fasteners (approx. 1000)
In
Stock 		$16.99 Pack
37343 3/8'' Corrugated Fasteners (approx. 1000)
In
Stock 		$17.99 Pack
33629 1/2'' Corrugated Fasteners (approx. 1000)
In
Stock 		$18.99 Pack



Home Power Tools and Shop Accessories Nailers and Staplers Corrugated Fastener Tool for Face Frame Construction
Locate Your Nearest Rockler Store

"I only get to visit the Pittsburgh store once a year so I make sure to make my visit count. The staff there is always helpful and very patient as I zip from aisle to aisle like a child in a toy store."
- Charlie G - 04/20/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1