- Overview
- More Info
- Reviews
Slides are already incorporated with sides to let you make drawers like a pro!
|
Heavy gauge epoxy drawer slides are incorporated with white epoxy coated steel drawer sides. All you have to do is make the bottom, front and back and install. Thin drawer side material gives you more space, plus it won’t warp or split.
Sides also have ready made channel for 1/4'' thick drawer bottoms. Drawer extends 4 1/2'' less than overall length. Holds up to 75 pounds. Works on inset or overlay.
|
| |
Customer Reviews and Photos for:
Metal Drawer Slides and Sides
|
Average Rating:
4.6
(7 customer reviews)
$30.99
Add your review...
|
|
|
1) Submitted by
Debbie, from Nine Mile Falls, WA
on 8/5/2011
Customer Rating: 
The instructions leave a little to be desiredI would rate higher if they were better. After looking a pictures and seeing another shelf in use at my parents, the instructions made a little more sense but the drawings are confusing. Initially the measurements take some time to figure out, but if planning on making a few, the time will be cut on the next ones. Putting together and installing is a snap, be aware these will not install to face frame, at least not mine with a 5/8" front I would have had to have a 1/4" front to fit. This was okay, I simple cut spacers and installed inside cabinet to the spacers and was ready to go. I installed the glides in my cabinet in less than 5 minutes by measuring and cutting 2 blocks of wood to the desired height of the shelf, and resting the glide on it while I screwed into place. I also used 1/2" plywood for the bottom for better strength.
|
|
2) Submitted by
Jim McHatton, from Acworth, GA
on 9/9/2009
Customer Rating: 
This is one great product. With a couple of measurements, I set up a fixture with the dimensions. Then it was a matter of cutting the wood and assembling. The use of a 90 degree corner was of great assist.
The only hard part is getting the screws inside such a small opening inside the cabinet. Best part, the glides mount on the inside, or under the drawer, thus giving you much more room.
|
|
3) Submitted by
Wendy Hobaugh, from Ragley, LA
on 7/28/2009
Customer Rating:
My entire kitchen has these slides so I could customize my space. Not only are they absolutely wonderful and slide soooo easy, I also have a drawer that holds my dogs' 44 lb. bag of food. I extend the 6" height sides by simply making a smaller box the height I need out of 1/2 ply and proceed as normal. Looks a tad odd when you open it, but I get exactly what I want! Great product!
|
|
4) Submitted by
Tom Larson, from Elkton, FL
on 5/2/2009
Customer Rating:
These make a sturdy and smooth operating drawer or pull out shelf. Cabinet part is easy to mount. I used a 90 degree corner reinforcement to anchor the slide end to the cabinet rear.
|
|
5) Submitted by
Daniel Kelly, from Mineral Point, MO
on 2/6/2009
Customer Rating:
By using the metal side/slides is a quick to get strong drawers.
|
|
6) Submitted by
Doug Winterburn, from Caasa Grande, AZ
on 12/5/2008
Customer Rating:
Had a 23"W x 5"H space in my 5th wheel. This product made a nice wine cellar.
|
|
7) Submitted by
John McClellan, from Fremont, OH
on 8/7/2008
Customer Rating:
The drawer slides are the best thing since sliced bread. It is great to be able to custom build drawers to the sizes needed and be able to creatively organize storage areas.
|
Home  Hardware Drawer Slides and Drawer Parts Euro / Roller Bearing Drawer Slides Metal Drawer Slides and Sides 
|
(0 Items)
