Home Hardware Screws and Fasteners Knock Down Fittings and Connectors Minifix (KD) Fittings


Minifix (KD) Fittings

Minifix (KD) Fittings

$7.39Pack   Scoll Down to Order
Currently In Stock


Average Rating: Customer Review Rating: 3.5  (14 customer reviews)




See More Images
Rockler Advantage


Minifix (KD) Fittings available for 1/2" and 3/4" thick stock New spreading bolt design, simply rotate cam with screwdriver to tighten and lock in place.

  • Overview
  • More Info
  • Reviews
Bookmark and Share  
An ideal choice of knockdown fittings when clamping is difficult on large assemblies. This exceptionally strong mechanical fastener is great for both knock down fittings and permanent joints.
  • #47243 - Recommended for 1/2'' thick stock.
  • #22161 - Recommended for 3/4'' thick stock.

Bookmark and Share  

Technical Details:

  • Exceptionally strong mechanical fastener is great for both knock down fittings and permanent joints.
  • 8 fittings per package.
  • New spreading bolt design.
  • Zinc Alloy Cam with Black finish.
  • Simply rotate cam with screwdriver to tighten and lock in place.
  • Additional Caps available in Brown or White
  • Minifix JIG IT Template An easy to use marking and drilling guide for 3/4" Minifix fasteners (#22161 only). Mark location of cam holes with a center punch. Includes drill guide bushing for drilling 8mm horizontal hole. Includes clamp and drill guide.

Drill bits and Stop Collars
For 3/4'' Minifix, use #28516 8mm Brad Point bit with and #21249 15mm Forstner bit.

For 1/2'' Minifix, use #28516 8mm Brad Point bit and #21172 1/2'' Forstner bits.

What's in the Box?

(1) 8 Pack of Minifix (KD) Fittings

 

Technical Documents
Bookmark and Share  

Customer Reviews and Photos for:
Minifix (KD) Fittings

Average Rating:
Customer Review Rating: 3.5
3.5
(14 customer reviews)
$7.39

Add your review...
1) Submitted by Robert G., from Glen Burnie, MD on 8/17/2009
Customer Rating: Customer Review Rating: 4.0
Worked as I expected. Just like the furniture you buy and assemble. I used 3/4" plywood for my project and ordered the 3/4" kit. I think it might be better to use the 1/2" for 3/4" plywood as you have to go about 3/4 of the way through the wood. One small slip and you can go all the way through. Plus you really need to use metric drill bits as English ones (even though close in size) won't work as well.
2) Submitted by Colleen, from Lawrenceville, PA on 8/13/2009
Customer Rating: Customer Review Rating: 3.0
I used these to replace cams shipped with RTA product I ordered. The cam that came with the cabinet cracked and broke quite easily. These were solid and really improved the stability of the cabinets and while cams fit with inserts already in place; I did replace several of those as well.
3) Submitted by Larry Garrett, from Lebanon, IN on 1/15/2009
Customer Rating: Customer Review Rating: 4.0
I used these Minifix fittings to hold the center top onto an ELL shaped desk and they worked very well. They pulled the 2 side cabinets tight and held the top down flush with the sides!
4) Submitted by Jon J Varteresian, from Hubbardston, MA on 3/5/2008
Customer Rating: Customer Review Rating: 5.0
I used these to hold a table top onto a cabinet base. They look good, and pull the top tight onto its base (3/4" uprights). One a large item you have to be real careful on your placement accuracy, the holes need to be right on target. Keep in mind that if you use them on material that is not 3/4" or 1/2" you have to offset and adjust the holes accordingly, otherwise the insert may sit too deep.
5) Submitted by Matthew, from Greenwood Village, CO on 7/22/2008
Customer Rating: Customer Review Rating: 4.0
When combined with the tools recommended by Rockler these are a breeze to install and hold really well. I tried three different types of these knockdown cam-style pieces and all but these failed to hold onto the stock (3/4 inch veneered plywood). These held rock solid inside the soft wood thanks to the expanding grip. The only problem I see with them is since the post is pretty thin it's easy for it to get off-center from the hole you've drilled. I had to get into the stock with a small screwdriver to pull the post back into center so the cam would grab onto it (otherwise the cam would just push the stock back out when trying to tighten it). I highly recommend these guys. Make sure you get the minifix jig though!
6) Submitted by Marvin Watson, from Port Orchard, WA on 11/16/2007
Customer Rating: Customer Review Rating: 4.0
I used the Minifix (KD) fittings on the sides of my bookshelves that I was building. The installation was quick and easy as well as being accurate.
7) Submitted by Carolyn Campbell, from Green Bay, VA on 2/13/2007
I love the minifix fittings. I have used them in making cabinets and bookcases. They are great and hold pieces together better than nails.
See all 14 reviews...
 
Order this Item
Minifix Fittings:
Quantity Item Number Item Stock Status Price
47243 Minifix (KD) Fittings for 1/2'', (8 per Pack)
In
Stock 		$7.39 Pack
22161 Minifix (KD) Fittings for 3/4'', (8 per Pack)
Quantity Discounts Available:
5 or more: $6.65
In
Stock 		$7.39 Pack
Caps:
Quantity Item Number Item Stock Status Price
30676 Brown Cap for 3/4'' Cams, (8 per Pack)
In
Stock 		$1.19 Pack
30684 White Caps for 3/4'' Cams, (8 per Pack)
In
Stock 		$1.19 Pack
Accessories:
Quantity Item Number Item Stock Status Price
28516 8mm Metric Brad Point Drill Bit
In
Stock 		$5.79 Each
21249 15mm Forstner Bit, 3/8'' Shank
In
Stock 		$12.19 Each
21172 1/2'' Forstner Bit, 3/8'' Shank
In
Stock 		$7.19 Each



Home Hardware Screws and Fasteners Knock Down Fittings and Connectors Minifix (KD) Fittings
Locate Your Nearest Rockler Store

"Every time I have been in a Rockler store around the country I have left feeling that I received wonderful service and most always had exactly what I needed in stock at a fair to great price. the only complaint, if it can be called that, is that I have to drive over 45 minutes to reach the nearest Rockler store. My wife probably appreciates that distance, as I am certain that if one was as close as I wished it to be, we would have very little left in our checkbook!"
- Larry Matthews - 02/17/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web2