Home Power Tools and Shop Accessories Table Saws and Table Saw Accessories Table Saw Set-Up and Calibration Tools Superbar Table Saw Gauge


Superbar Table Saw Gauge

Superbar Table Saw Gauge

$89.29Each  
Currently In Stock


Average Rating: Customer Review Rating: 4.7  (6 customer reviews)




View Larger Image
Rockler Advantage



  • Overview
  • More Info
  • Reviews
Bookmark and Share  
Prevents kickback by keeping saws aligned, tuned up and calibrated to with in a thousandth of an inch!
Bookmark and Share  
Designed to fit all standard 3/4'' X 3/8'' miter slots, as well as the sears .740 slot, the SuperBar table saw gauge creates workshop safety and helps keep your table saw, radial arm saw, chop saw, and sliding compound miter saw in perfect shape! Outrigger rods give you maximum operation stability. Includes precision dial indicator with hex wrench for installations, plus hex wrench for adjustment screws.
 

Technical Documents
Bookmark and Share  

Customer Reviews and Photos for:
Superbar Table Saw Gauge

Average Rating:
Customer Review Rating: 4.7
4.7
(6 customer reviews)
$89.29

Add your review...
1) Submitted by Howard J, from Damascus, OR on 3/27/2011
Customer Rating: Customer Review Rating: 5.0
I had set up my table saw using a tape and it was off enough to make burn marks and was hard to pust stock through. I set the gauge up in about five minutes and had the saw running great, no burn marks and easy to to make cross cut and rip cuts. Good value.
2) Submitted by Mark U, from Westside, IA on 8/18/2008
Customer Rating: Customer Review Rating: 5.0
This set up device is simple to adjust to the miter slot. I then tuned-up my table saw in record time, to within .001 of an inch.
3) Submitted by Mike Villemure, from Rochester, MN on 7/1/2008
Customer Rating: Customer Review Rating: 5.0
Easy to set up and dead accurate in setting the saw blade. Get one of these and you will save time and make more accurate cuts.
4) Submitted by Eric, from Columbus, MS on 2/3/2010
Customer Rating: Customer Review Rating: 4.0
Awesome product. Works flawlessly. Only con is price, little on the high side.
5) Submitted by Marshal, from Maple Grove, MN on 2/6/2010
Customer Rating: Customer Review Rating: 4.0
I bought the Super Bar and Master Plate for my Ridgid R4511. I had a few problems at first because I did not have the dial indicator bolted tight enough to the plastic sled which slides in the miter slot. Also, I had to make the sled more snug within the miter slot. Once I got that taken care of everything worked fine. What I do not like about the superbar... on the R4511 the miter slots are not real close to the blade. Thus when I tried to test the arbor run out I did not have a lot of room to tilt the dial indicator at a 45 degree angle.
Oh yes... 1. the master plate is GREAT! 2. With this combo I was able to PROPERLY get my saw in alignment... better cuts and reduced kickback risk!
6) Submitted by Butch Conway, from Jonesboro, AR on 10/12/2007
Customer Rating: Customer Review Rating: 5.0
I just got back into woodworking. I have a ten year old Craftsman contractor style saw. While using the saw I was getting a significant amount of edge burn and thought it normal. I spoke to a friend about it and he suggested that my blade was most likely not parallel to the fence / miter gauge slot. I bought this Superbar and checked. He was most certainly correct. The blade was almost thirty thousandths out of parallel. I made some adjustments to the trunnion and got it to nearly perfect (one thousandth out). The burn is gone. I also used it to check the arbor run-out and rip fence. They were both on the money, but I was glad to validate the facts. I really don't know how you'd be able to check these settings with this much accuracy without a Superbar!
 
Order this Item
Quantity Item Number Item Stock Status Price
23139 Super Bar Table Saw Gauge
In
Stock 		$89.29 Each



Home Power Tools and Shop Accessories Table Saws and Table Saw Accessories Table Saw Set-Up and Calibration Tools Superbar Table Saw Gauge
Locate Your Nearest Rockler Store

"I love shopping with Rockler the list of items I have purchased is many...... have yet to make it to the local store.............. when I do I will need lots of cash Thank you Rockler"
- AQC Handyman - 07/09/2012
See more...
Copyright © 2013, Rockler Companies, Inc. This is a Secure Shopping Site
web1