SAVE 20% TODAY!

Power Tool Mobile Base Hardware

$49.99Each

YOU SAVE $13.00 (Regular Price: $62.99)

Average Rating:

(161 customer reviews)

This universal mobile base has a 600 lb. load rating and raises the tool approximately 3/4'' from the floor.

Our caster easily detaches with two pins from the Complete Mobile Base and transfers to any other Mobile Base Frame.

Overview
More Info
Reviews
Videos

This sturdy, affordable mobile base hardware allows you to build a base of any size by adding wood stretchers in whatever length you need. This adds up to big cost savings, especially when compared to large mobile bases that are ready-made. Just step on the generously-sized pedal and the mobile base raises the tool onto a single swivel caster. Tripod design allows for easy maneuverability.

More...

Technical Details:

Load rating of 600 pounds.
Mobile base raises tool approximately 3/4'' off the floor.
1-1/2'' square hardwood stretchers supplied by user.

Power Tool Mobile Base Instructions

Back to overview

Customer Reviews and Photos for:
Power Tool Mobile Base Hardware

Average Rating:

4.3
(161 customer reviews)

$49.99

Add your review...

1) Submitted by Ken Durrant, from Morgan, UTAH on 5/13/2012

Customer Rating:

I purchased one to put under my planer...it worked so well, I purchased a second one for my joiner...that worked so well, I purchased one for my bandsaw...and that work so well that my fourth one just came to put under my drill press and they all stack away from the middle of the floor. These are easy to install and work very well, I recommend them to anyone.

2) Submitted by Sam Green, from Eustis, FLORIDA on 1/7/2012

Customer Rating:

I just bought this base and put it under my new Craftsman hybrid table saw. It weighs at least 450 pounds. It was not easy to install, but it was worth the effort. It is very heavy duty and works great. I would highly recommend it.

3) Submitted by Ed, from Lancaster, VA on 7/11/2011

Customer Rating:

I recently enclosed my carport to convert the carport to a wood shop. Since I am working with a small space everything needs to be mobile to make room for various machines and tasks. I purchased 2 of these mobile bases to use on a 14" band saw and a drill press. I find these bases very economical, easy to assemble and customize, and they work as advertised.

4) Submitted by Art Todesco, from Franklin, NC on 5/27/2011

Customer Rating:

As I already had 2 rear castors on the table saw, I purchased only the castor/pedal and installed it on an oak 2x2 mounted at the bottom of the saw stand. This unit is really convenient. Previously, I had wheels at the front corners which were put down using a threaded rod with a cross Tee. So you had to bring down each wheel separately and sometimes, just the vibration of the saw would cause them to move. The Rockler pedal/castor works soooooo much better.
Thanks.

Pedal & Castor mounted to table saw base
(click to see full-size picture in new window)
Product Review for Power Tool Mobile Base Hardware - Rated 5 Stars

Product Review for Power Tool Mobile Base Hardware - Rated 5 Stars

5) Submitted by Bruce, from Elkhorn, CA on 8/28/2012

Customer Rating:

The stand is a good value for the price but it takes a lot of time to put together. Next time I would rather spend the extra money for a ready made stand. The advantage of this design is that you can make it whatever size you need for a tool. The time required would have been less with better directions. No parts were specified so I needed to do a pre-assembly to be sure I had what was needed and to determine which nuts were used where. The directions are also incorrect in stating that the wood should be cut to a length that is 1/2" greater than the size needed for the tool. For one side where the fixed feet go that is true but for the opposite side where two wheels mount the length needs to be 2" less than the overall dimension of the tool's base or the wheels have no place to go. I could only mount the saw stand's legs in one direction so I reversed the saw on the stand before placing the stand on the mobile base. I did this so that the pivot for the roller would be on the back side of the table saw when it was in use. Otherwise I would be tripping over it all the time.

6) Submitted by John, from Spring Hill, FL on 5/5/2011

Customer Rating:

I was amazed at the qaulity of this mobile base. I didn't think it would be strong enough for my 10" Jet table saw as it weight over 300lbs. It works easily in my garage as I don't have the room to mount the saw permamently. I will be ordering more of these for my other equiptment. I used inch and a half steel tubing I had laying around to connect the four corners. It made this unit real sturdy, and I won't have to worry about this unit breaking or sagging with the weight I threw on it. Love this unit. Use a smaller drill size and clamps to line up the holes. The breaks in the receivers are not ninty degree bends. I will recomend this unit to anyone, and the price is right.

7) Submitted by Tim, from Madison, GA on 4/13/2011

Customer Rating:

Great product! Just purchased my third base.

See all 161 reviews...

Mobile Base:
Quantity	Item Number	Item	Stock Status	Price
	92051	Mobile Base with Caster (wood not included) (Regular Price: $62.99)	In Stock	Special: $49.99 Each
Options:
Quantity	Item Number	Item	Stock Status	Price
	36968	1-1/2'' x 1-1/2'' x 43'' Hardwood Stretcher for Mobile Base	Currently Unavailable until Jun 22, 2013	$7.24 Each
	23650	Caster Only for Mobile Base	In Stock Online Only	$27.99 Each

Power Tool Mobile Base Hardware

Customer Reviews and Photos for: Power Tool Mobile Base Hardware

Customer Reviews and Photos for:
Power Tool Mobile Base Hardware