- Overview
- More Info
- Reviews
- Videos
This versatile instrument takes step, depth, external and internal measurements from
0-6" and displays them in inch, metric and fraction modes on a large, clear digital
display. Bottom jaw is moved up and down the beam by a smooth thumbroll for
controlled adjustment and a locking screw tightens to lock measurements for a stable,
accurate reference. Measurements are accurate to 0.001".
|
Requires CR2032 battery (included).
|
| |
Customer Reviews and Photos for:
iGaging 6'' Digital Fractional Caliper
|
Average Rating:
3.8
(12 customer reviews)
$39.99
Add your review...
|
|
|
1) Submitted by
Bill Moraca, from Dowagiac, MI
on 7/25/2011
Customer Rating: 
So far every thing I have measured has been perfect. The display is very easy to read. The price was right. I use it more than my Sears Craftsman caliper because of the ease to use. Great product. You have a customer for life. Thanks
|
|
2) Submitted by
sshortdog, from Lake Worth, FL
on 5/8/2011
Customer Rating:
Handy, accurate, good price.
|
|
3) Submitted by
david c. michael, from Sarver, PA
on 4/24/2011
Customer Rating:
So far every thing I have measured has been perfect. The display is much easier to read than my decimal caliper and no need to convert to fractional! The price was right also. Visitors to my shop are envious!
|
|
4) Submitted by
Mike Collier, from Boiling Springs, SOUTH CAROLINA
on 4/22/2011
Customer Rating: 
The large display is great and easy to read. It was a very affordable product, that has added precision to my woodworking. I would recommend them to anyone who wishes to improve their accuracy.
|
|
5) Submitted by
Marc from MAINE
on 4/11/2011
Customer Rating:
Shipping was timely and the product appears to be of good quality and the sale price made it affordable. Have only used it once since purchased and works as stated.
|
|
6) Submitted by
Fritz Tallian, from Farmington Hills, MI
on 4/3/2011
Customer Rating:
Great tool for measuring anything under 6 inches. I use it daily in my shop. Replaces all other measuring devices. I am retired and the eyesight isn’t what it used to be. The digital display is easy to read. Automatic shutoff saves battery life. Highly recommended.
|
|
7) Submitted by
Bob C., from Casselberry, FL
on 1/8/2011
Customer Rating:
I purchased two of these for general usage. They have a large digital display Easy to read, are made of stainless steel, with a plastic housing for the digital display and use a common Battery, a CR2032. They will display readings in mm, inches, and inches and fractions. So far both seems two work fine. I have a couple of similar calipers but they use a smaller battery and they drain the battery when not in use, so I am hoping this pair will provide longer battery life in use. Time will tell. They are very inexpensive, and if the battery life meets the ~1 year as stated in the product info, they will be well worth the price.
|
|
8) Submitted by
Vic Segarich, from Nashua, NH
on 7/7/2011
Customer Rating:
Precise and accurate. I checked it with a feeler gauge and was right on the mark from .003 to .050. It took a few tries to get use to the adjustment wheel because it seems a little loose but overall a fine instrument for the price and for woodworking.
|
|
9) Submitted by
Cody Craven, from Lake Elsinore, CA
on 7/23/2011
Customer Rating: 
When measuring in decimal inches my unit will jump between two readings, one that is accurate or close at least and one that is far too high to be accurate. The problem has been occuring far more frequently to the point of frustration. I've tried holding different combinations of buttons and removing and reinserting the battery to no avail. Next attempt will be replacing the battery. Would have rated 5 stars until this issue started. From what I have been able to find this isn't a common issue, I just can't rate this well from my experience.
|
|
10) Submitted by
Ira Matheny, from Modesto , CA
on 5/20/2012
Customer Rating: 
Calipers work as they should, however, they auto-shut down in just a very brief time, giving only a couple of seconds of use. I am forced to turn on and reset for every measurement. I tried the 'remove the battery for 15 seconds' and it did nothing to remedy the problem. This will need to be returned for replacement or refund. I will go back to the Wixey unit which worked flawlessly.
|
|
11) Submitted by
Carl, from Corsicana, TX
on 6/9/2013
Customer Rating:
Originally, I was very happy with this device, but not any more. It won't stay on unless you keep pressure on the battery cover. Set it at 0, open it, close it right back, & it's no longer at 0. It keeps resetting from fractional or decimal inches to metric. I've had it about 6-8 months.
|
|
12) Submitted by
Lynn W, from Dallas Area, TX
on 1/6/2011
Customer Rating:
Purchased this product to replace one that had walked away some time back. Works exactly as promised - would buy it again.
|
Home  Hand Tools and Shop Accessories Marking and Measuring Tools Measuring Tools iGaging 6'' Digital Fractional Caliper 
|
(2)
